Home › Drivetrain › U760E AUTOMATIC TRANSMISSION / TRANSAXLE › DIFFERENTIAL CASE › 2013.12–2014.08
RM3160E _52 Drivetrain _019727 U760E AUTOMATIC TRANSMISSION / TRANSAXLE _0107365 DIFFERENTIAL CASE G

U760E AUTOMATIC TRANSMISSION / TRANSAXLE  DIFFERENTIAL CASE  INSPECTION  


PROCEDURE

Hide 1.INSPECT DIFFERENTIAL SIDE GEAR BACKLASH

a.
C083562

Hold the differential case in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.



b.

Place a dial indicator at a right angle to one of the differential side gear teeth.


c.

Hold either front differential pinion and measure the backlash of the differential side gear.

Standard Backlash:

0.05 to 0.20 mm (0.00197 to 0.00787 in.)


Front No. 1 Differential Side Gear Thrust Washer Thickness
Thickness Thickness
0.90 mm (0.0354 in.) 1.10 mm (0.0433 in.)
1.00 mm (0.0394 in.) 1.20 mm (0.0472 in.)

If the backlash is not within the standard range, select another front No. 1 differential side gear thrust washer.