Home › Drivetrain › MF1A (TRANSFER / 4WD / AWD) › TRANSFER ASSEMBLY › 2013.12–2016.11
RM3160E _52 Drivetrain _019685 MF1A TRANSFER / 4WD / AWD _0107526 TRANSFER ASSEMBLY A

MF1A TRANSFER / 4WD / AWD  TRANSFER ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 36100 1.INSTALL TRANSFER ASSEMBLY

a.

Install the 4 new transfer and transaxle setting stud bolts to the automatic transaxle case positions shown in the illustration.

C297719C01
1.01,0.396 1.385,0.667 0.375,0.271 10 false A 1.958,0.927 2.333,1.198 0.375,0.271 10 true A 1.354,0.333 1.729,0.604 0.375,0.271 10 false A 1.385,2.521 1.76,2.792 0.375,0.271 10 false B 4.5,1.292 4.813,1.448 0.313,0.156 10 false *a 6.667,1.344 6.979,1.5 0.313,0.156 10 false *b 3.927,0.875 4.24,1.031 0.313,0.156 10 false *c 6.052,1.083 6.365,1.24 0.313,0.156 10 false *c 6.052,1.635 6.365,1.792 0.313,0.156 10 false *c 3.906,1.792 4.219,1.948 0.313,0.156 10 false *c 3.333,0.385 3.708,0.656 0.375,0.271 10 false A 5.458,0.604 5.833,0.875 0.375,0.271 10 false B
*a 69 mm (2.72 in.) *b 49 mm (1.93 in.)
*c 22 mm (0.866 in.) - -


Torque:
39.2 N*m (400 kgf*cm, 29 ft.*lbf)

NOTICE:

Install the sealed side of the transfer and transaxle setting stud bolt to the automatic transaxle assembly.



b.

Install the transfer assembly to the automatic transaxle assembly with the 8 nuts.

Torque:
68.6 N*m (700 kgf*cm, 51 ft.*lbf)

NOTICE:
·

Install the transfer assembly to the automatic transaxle assembly horizontally.

·

Do not touch the transfer assembly oil seals during installation.