Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › REAR DRIVE SHAFT ASSEMBLY(for AWD)
RM3160E _52 Drivetrain _019686 DRIVE SHAFT / PROPELLER SHAFT _0107995 REAR DRIVE SHAFT ASSEMBLY(for AWD) G

DRIVE SHAFT / PROPELLER SHAFT  REAR DRIVE SHAFT ASSEMBLY(for AWD)  INSPECTION  


PROCEDURE

Hide 42340B 1.INSPECT REAR DRIVE SHAFT ASSEMBLY

a.
C091598

Check that there is no excessive play in the radial direction of the outboard joint.


b.

Check that the inboard joint slides smoothly in the thrust direction.


c.

Check that there is no excessive play in the radial direction of the inboard joint.


d.

Check the boots for damage.


e.
C127699N07
1.479,1.552 1.635,1.75 0.156,0.198 10 false A

Check whether each drive shaft dimension (A) is within specification.

NOTICE:

Keep the drive shaft assembly level during inspection.


Dimension (A):
for LH Side 758.25 mm (2.49 ft.)
for RH Side 738.25 mm (2.42 ft.)