Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY
RM3160E _52 Drivetrain _019686 DRIVE SHAFT / PROPELLER SHAFT _0107997 PROPELLER SHAFT ASSEMBLY A

DRIVE SHAFT / PROPELLER SHAFT  PROPELLER SHAFT ASSEMBLY  DISASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:
·

When using a vise, place aluminum plates between the part and vise.

·

When using a vise, do not overtighten it.



PROCEDURE

Hide 1.REMOVE PROPELLER SHAFT ASSEMBLY

a.
C293531
1.656,0.75 0.927,0.281 0.927,0.281 1.604,0.792 true 0.76,0.188 1.073,0.385 0.313,0.198 10 false *a
*a Matchmark


Place matchmarks on the propeller shaft assembly and universal joint flange.

NOTICE:

Do not use a punch for the marks.



b.

Remove the 4 nuts, 4 bolts, 4 washers and propeller shaft assembly.


Hide 2.REMOVE INTERMEDIATE SHAFT ASSEMBLY

a.
C293532
1.833,1.49 1,1.74 1,1.74 1.781,1.417 true 0.844,1.646 1.156,1.844 0.313,0.198 10 false *a
*a Matchmark


Place matchmarks on the rear propeller shaft assembly and universal joint flange.

NOTICE:

Do not use a punch for the marks.



b.

Using a 6 mm hexagon socket wrench, remove the 6 cross groove joint set bolts, 2 universal joint washers and intermediate shaft assembly.


Hide 37230J 3.REMOVE NO. 2 CENTER SUPPORT BEARING ASSEMBLY (for Rear Side)

a.
C167278
1.604,1.073 1.604,0.646 1.604,0.646 0.615,0.646 true 1.344,1.083 1.344,0.656 true 0.438,0.563 0.75,0.76 0.313,0.198 10 false *a
*a Matchmark


Place matchmarks on the intermediate shaft assembly and universal joint flange.

NOTICE:

Do not use a punch for the marks.



b.
C293534
0.667,1.885 1.073,1.885 1.073,1.885 1.563,1.417 true 0.354,1.802 0.813,2 0.458,0.198 10 false SST

Using SST and a hammer, release the staked part of the nut.

SST
09930-00010  

NOTICE:

Release the staked part of the nut completely, otherwise the threads of the intermediate shaft assembly may be damaged.



c.
C296181
1.031,1.25 1.031,0.823 false 1.813,1.521 2.125,1.677 0.313,0.156 10 false *a 0.073,0.667 0.385,0.823 0.313,0.156 10 false *b 0.896,1.26 1.354,1.458 0.458,0.198 10 false SST
*a Turn
*b Hold


Using SST to hold the universal joint flange, remove the nut and washer.

SST
09330-00021  


d.
C296182
0.656,2.208 1.031,2.208 1.031,2.208 1.031,1.708 false 1.5,4.198 1.813,4.354 0.313,0.156 10 false *a 0.24,2.594 0.552,2.75 0.313,0.156 10 false *b 0.375,2.125 0.833,2.323 0.458,0.198 10 false SST
*a Turn
*b Hold


Using SST, remove the universal joint flange from the intermediate shaft assembly.

SST
09950-40011  (09951-04020, 09952-04010, 09953-04030, 09954-04010, 09955-04061, 09957-04010, 09958-04011)

NOTICE:
·

Be careful not to damage the universal joint flange.

·

Do not overtighten the vise.

·

Apply grease to the threads and tip of the center bolt of SST before use.




e.

Remove the No. 2 center support bearing assembly and washer from the intermediate shaft assembly.


Hide 37230J 4.REMOVE NO. 2 CENTER SUPPORT BEARING ASSEMBLY (for Front Side)

a.
C167276
1.823,1.083 1.823,0.708 1.823,0.708 2.833,0.708 true 2.094,1.073 2.094,0.708 true 2.875,0.625 3.188,0.823 0.313,0.198 10 false *a
*a Matchmark


Place matchmarks on the intermediate shaft assembly and universal joint flange.

NOTICE:

Do not use a punch for the marks.



b.
C293533
0.583,1.844 1.167,1.844 1.167,1.844 1.552,1.427 true 0.271,1.76 0.729,1.958 0.458,0.198 10 false SST

Using SST and a hammer, release the staked part of the nut.

SST
09930-00010  

NOTICE:

Release the staked part of the nut completely, otherwise the threads of the intermediate shaft assembly may be damaged.



c.
C287573
2.906,1.521 2.906,0.771 true 1.885,1.729 2.198,1.927 0.313,0.198 10 false *a 0.281,1.333 0.594,1.531 0.313,0.198 10 false *b 2.802,1.552 3.26,1.75 0.458,0.198 10 false SST
*a Turn
*b Hold


Using SST to hold the universal joint flange, remove the nut and washer.

SST
09330-00021  


d.
C296180
0.74,2.094 1.104,2.094 1.104,2.094 1.104,1.573 false 1.563,4.219 1.875,4.375 0.313,0.156 10 false *a 0.333,2.521 0.646,2.677 0.313,0.156 10 false *b 0.427,2.01 0.885,2.208 0.458,0.198 10 false SST
*a Turn
*b Hold


Using SST, remove the universal joint flange from the intermediate shaft assembly.

SST
09950-40011  (09951-04020, 09952-04010, 09953-04030, 09954-04010, 09955-04061, 09957-04010, 09958-04011)

NOTICE:
·

Be careful not to damage the universal joint flange.

·

Do not overtighten the vise.

·

Apply grease to the threads and tip of the center bolt of SST before use.




e.

Remove the No. 2 center support bearing assembly and washer from the intermediate shaft assembly.