Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY
RM3160E _58 Vehicle Interior _019712 SEAT _0108046 REAR NO. 2 SEAT ASSEMBLY A

SEAT  REAR NO. 2 SEAT ASSEMBLY  REASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seat frame may injure your hands.


PROCEDURE

Hide 72660J 1.INSTALL REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY (for RH Side)

a.
B363397

Engage the 4 cable clamps to install the rear No. 2 seat cushion lock cable assembly.


Hide 72660K 2.INSTALL REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY RH

a.
B363396

Engage the 4 cable clamps to install the rear No. 2 seat cushion lock cable assembly RH.


Hide 71843A 3.INSTALL REAR NO. 2 SEAT RECLINING COVER RH (for RH Side)

a.
B365206

Install the rear No. 2 seat reclining cover RH with the 2 screws.


Hide 71844A 4.INSTALL REAR NO. 2 SEAT RECLINING COVER LH (for RH Side)

a.
B365205

Install the rear No. 2 seat reclining cover LH with the 2 screws.


Hide 79273A 5.INSTALL NO. 2 SEAT NO. 2 HINGE COVER

a.
B365277

Engage the guide.


b.

Install the No. 2 seat No. 2 hinge cover with the screw.


Hide 79273C 6.INSTALL NO. 2 SEAT NO. 4 HINGE COVER

a.
B365276

Engage the guide.


b.

Install the No. 2 seat No. 4 hinge cover with the screw.


Hide 71704B 7.INSTALL NO. 2 REAR SIDE SEAT BAND SUB-ASSEMBLY (for RH Side)

a.
B365275

Engage the hook to install the No. 2 rear side seat band sub-assembly.


Hide 79023 8.INSTALL NO. 2 SEATBACK COVER SUB-ASSEMBLY RH

a.

Temporarily install the No. 2 seatback cover sub-assembly RH to the separate type rear seatback pad.


b.
B363405

Using hog ring pliers, install the No. 2 seatback cover sub-assembly RH to the separate type rear seatback pad with 6 new hog rings.

NOTICE:
·

Be careful not to damage the No. 2 seatback cover sub-assembly RH.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the No. 2 seatback cover sub-assembly RH.




Hide 9.INSTALL NO. 2 SEATBACK COVER WITH PAD RH

a.
B363392

Engage the 8 hooks to install the No. 2 seatback cover with pad RH.


Hide 71931C 10.INSTALL REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY

a.
B363395

Engage the 4 claws to install the 2 rear No. 2 seat headrest support assemblies.


Hide 71866B 11.INSTALL NO. 2 REAR SEAT COVER BEZEL (for RH Side)

a.
B363360

Engage the guide.


b.

Install the No. 2 rear seat cover bezel with the 2 screws.


Hide 71704 12.INSTALL REAR SIDE SEAT BAND SUB-ASSEMBLY (for RH Side)

a.
B363390

Engage the hook to install the rear side seat band sub-assembly.


Hide 79207B 13.INSTALL NO. 2 SEATBACK BOARD SUB-ASSEMBLY RH

a.
B369044
2.917,1.458 3.229,1.802 0.313,0.344 11 false 1 3.104,1.885 3.417,2.229 0.313,0.344 11 false 2

Engage the 12 claws as indicated by the arrows, in the order shown in the illustration to install the No. 2 seatback board sub-assembly RH.


Hide 79201B 14.INSTALL NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY RH

a.
B363383

Using a T45 "TORX" socket wrench, install the No. 2 seat cushion frame sub-assembly RH with the 2 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


Hide 71691E 15.INSTALL NO. 1 REAR SEAT CUSHION HINGE COVER

a.
B365209

Engage the guide and 4 claws to install the No. 1 rear seat cushion hinge cover as shown in the illustration.


Hide 71692E 16.INSTALL NO. 2 REAR SEAT CUSHION HINGE COVER

a.
B365207

Engage the guide and 4 claws to install the No. 2 rear seat cushion hinge cover as shown in the illustration.


Hide 17.INSTALL REAR SEAT CUSHION HINGE COVER CAP

a.
B363351

Engage the 2 guides and claw to install the rear seat cushion hinge cover cap.


Hide 79021 18.INSTALL NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY RH

a.

Temporarily install the No. 2 seat cushion cover sub-assembly RH to the No. 2 rear cushion pad RH.


b.
B363401

Using hog ring pliers, install 11 new hog rings.

NOTICE:
·

Be careful not to damage the No. 2 seat cushion cover sub-assembly RH.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the No. 2 seat cushion cover sub-assembly RH.




c.
B363399

Using hog ring pliers, install the No. 2 seat cushion cover sub-assembly RH to the rear seat cushion pad RH with a new hog ring.

NOTICE:
·

Be careful not to damage the No. 2 seat cushion cover sub-assembly RH.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the No. 2 seat cushion cover sub-assembly RH.




Hide 19.INSTALL NO. 2 SEAT CUSHION COVER WITH PAD RH

a.
B363382

Engage the 13 hooks.


b.
B363381

Engagge the 2 clips to install the No. 2 seat cushion cover with pad RH.


Hide 20.INSTALL NO. 2 SEAT ASSEMBLY RH

a.
B363380

Install the 4 bolts.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


b.

Install the nut.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


c.

Using a T45 "TORX" socket wrench, install the bolt.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


d.
B363378

Engage the hook.


e.

Install the No. 2 seat assembly RH with the 2 clips.


Hide 73315A 21.INSTALL REAR SEAT INNER BELT COVER RH

a.
B363343

Engage the 2 claws to install the rear seat inner belt cover RH.


Hide 71970 22.INSTALL REAR SEAT HEADREST ASSEMBLY

Hide 72660L 23.INSTALL REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY LH

a.
B363367

Engage the 4 cable clamps to install the rear No. 2 seat cushion lock cable assembly LH.


Hide 72660J 24.INSTALL REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY (for LH Side)

a.
B363368

Engage the 4 cable clamps to install the rear No. 2 seat cushion lock cable assembly.


Hide 71843A 25.INSTALL REAR NO. 2 SEAT RECLINING COVER RH (for LH Side)

a.
B363366

Install the rear No. 2 seat reclining cover RH with the 2 screws.


Hide 71844A 26.INSTALL REAR NO. 2 SEAT RECLINING COVER LH (for LH Side)

a.
B363365

Install the rear No. 2 seat reclining cover LH with the 2 screws.


Hide 79273B 27.INSTALL NO. 2 SEAT NO. 3 HINGE COVER

a.
B363363

Engage the guide.


b.

Install the No. 2 seat No. 3 hinge cover with the screw.


Hide 79273 28.INSTALL NO. 2 SEAT HINGE COVER

a.
B363364

Engage the guide.


b.

Install the No. 2 seat hinge cover with the screw.


Hide 71704B 29.INSTALL NO. 2 REAR SIDE SEAT BAND SUB-ASSEMBLY (for LH Side)

a.
B363362

Engage the hook to install the No. 2 rear side seat band sub-assembly.


Hide 79024 30.INSTALL NO. 2 SEATBACK COVER SUB-ASSEMBLY LH

a.

Temporarily install the No. 2 seatback cover sub-assembly LH to the separate type rear seatback pad.


b.
B363371

Using hog ring pliers, install the No. 2 seatback cover sub-assembly LH to the separate type rear seatback pad with 6 new hog rings.

NOTICE:
·

Be careful not to damage the No. 2 seatback cover sub-assembly LH.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the No. 2 seatback cover sub-assembly LH.




Hide 31.INSTALL NO. 2 SEATBACK COVER WITH PAD LH

a.
B363361

Engage the 4 hooks to install the No. 2 seatback cover with pad LH.


Hide 71931C 32.INSTALL REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY

a.
B363369

Engage the 4 claws to install the 2 rear No. 2 seat headrest support assemblies.


Hide 71866B 33.INSTALL NO. 2 REAR SEAT COVER BEZEL (for LH Side)

a.
B363359

Engage the guide.


b.

Install the No. 2 rear seat cover bezel with the 2 screws.


Hide 71704 34.INSTALL REAR SIDE SEAT BAND SUB-ASSEMBLY (for LH Side)

a.
B363358

Engage the hook to install the rear side seat band sub-assembly.


b.
B363357

Engage the 3 hooks.


Hide 79209B 35.INSTALL NO. 2 SEATBACK BOARD SUB-ASSEMBLY LH

a.
B363356
2.583,1.427 2.844,1.677 0.26,0.25 10 false 1 2.813,1.729 3.073,1.979 0.26,0.25 10 false 2

Engage the 8 claws as indicated by the arrows, in the order shown in the illustration to install the No. 2 seatback board sub-assembly LH.


Hide 79202 36.INSTALL NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY LH

a.
B363354

Using a T45 "TORX" socket wrench, install the No. 2 seat cushion frame sub-assembly LH with the 2 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


Hide 71693A 37.INSTALL NO. 3 REAR SEAT CUSHION HINGE COVER

a.
B363353

Engage the guide and 4 claws to install the No. 3 rear seat cushion hinge cover as shown in the illustration.


Hide 38.INSTALL REAR SEAT CUSHION HINGE COVER CAP

a.
B363350

Engage the 2 guides and claw to install the rear seat cushion hinge cover cap.


Hide 71694 39.INSTALL LOWER REAR SEAT CUSHION HINGE COVER LH

a.
B363349

Engage the guide and 4 claws to install the lower rear seat cushion hinge cover LH as shown in the illustration.


Hide 79022 40.INSTALL NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY LH

a.

Temporarily install the No. 2 seat cushion cover sub-assembly LH to the rear seat cushion pad LH.


b.
B363373

Using hog ring pliers, install a new hog ring.

NOTICE:
·

Be careful not to damage the No. 2 seat cushion cover sub-assembly LH.

·

Be sure to securely install the hog ring as shown in the illustration while preventing wrinkles from forming on the No. 2 seat cushion cover sub-assembly LH.




c.
B363375

Using hog ring pliers, install the No. 2 seat cushion cover sub-assembly LH to the rear seat cushion pad LH with 10 new hog rings.

NOTICE:
·

Be careful not to damage the No. 2 seat cushion cover sub-assembly LH.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the No. 2 seat cushion cover sub-assembly LH.




Hide 41.INSTALL NO. 2 SEAT CUSHION COVER WITH PAD LH

a.
B363347

Engage the 8 hooks.


b.
B363346

Engage the hook.


c.
B363345

Engage the 2 clips to install the No. 2 seat cushion cover with pad LH.


Hide 42.INSTALL NO. 2 SEAT ASSEMBLY LH

a.
B363341

Install the 4 bolts.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


b.

Using a T45 "TORX" socket wrench, install the 2 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


c.
B363344

Install the No. 2 seat assembly LH with the 2 clips.


Hide 73316A 43.INSTALL REAR SEAT INNER BELT COVER LH

a.
B363342

Engage the 2 claws to install the rear seat inner belt cover LH.


Hide 71970 44.INSTALL REAR SEAT HEADREST ASSEMBLY