Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER RUBBER
RM3160E _59 Vehicle Exterior _019721 WIPER / WASHER _0101298 FRONT WIPER RUBBER A

WIPER / WASHER  FRONT WIPER RUBBER  REPLACEMENT  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 85222A 1.REMOVE FRONT WIPER BLADE

a.

Pull up the holder of the front wiper blade.

E288198
1.823,0.594 1.99,0.323 true 1.615,0.646 1.281,0.365 true 5.531,0.958 5.729,0.802 false 1.958,0.177 2.271,0.333 0.313,0.156 10 false *1 5.375,0.969 5.688,1.125 0.313,0.156 10 false *2 1.115,0.188 1.427,0.344 0.313,0.156 10 false *a
*1 Front Wiper Arm *2 Front Wiper Blade
*a Holder - -



b.

Remove the front wiper blade from the front wiper arm as shown in the illustration.

NOTICE:

Do not lower the front wiper arm with the front wiper blade removed. The arm tip may damage the windshield glass surface.



Hide 85214B 2.REMOVE WIPER RUBBER

a.
E273045

Remove the wiper rubber with the front wiper rubber backing plates from the front wiper blade.


b.
E273046

Remove the 2 front wiper rubber backing plates from the wiper rubber.


Hide 85214B 3.INSTALL WIPER RUBBER

a.
E273047

Install the 2 front wiper rubber backing plates to the wiper rubber.

NOTICE:
·

Align the protrusions on the wiper rubber and the notches of the backing plates.

·

Align the curve of the backing plates with the glass.




b.
E273048

Install the wiper rubber to the front wiper blade as shown in the illustration.

NOTICE:

Push the wiper rubber and front wiper backing plates into the front wiper blade strongly to engage them securely.



Hide 85222A 4.INSTALL FRONT WIPER BLADE

a.

Install the front wiper blade as shown in the illustration.

E288203
1.333,0.208 1.698,0.365 false 1.344,0.854 1.479,1 false 3.292,0.344 3.677,0.521 false 5.365,0.396 5.75,0.594 false 1.177,0.125 1.49,0.281 0.313,0.156 10 false *1 1.51,0.969 1.823,1.125 0.313,0.156 10 false *2 3.083,0.198 3.281,0.396 0.198,0.198 10 false *a 0,0.469 0.156,0.625 0.156,0.156 10 false - 5.167,0.25 5.365,0.448 0.198,0.198 10 false *a
*1 Front Wiper Arm *2 Front Wiper Blade
*a Holder - -



b.

Install the holder of the front wiper blade.