Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE FLUID
RM3160E _54 Brake _019693 BRAKE SYSTEM (OTHER) _0108085 BRAKE FLUID G

BRAKE SYSTEM (OTHER)  BRAKE FLUID  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT BRAKE FLUID LEVEL IN RESERVOIR

a.
C292858
2.281,0.604 2.135,0.604 false 2.281,1.177 2.135,1.177 false 1.979,0.51 2.292,0.667 0.313,0.156 10 false *a 1.979,1.094 2.292,1.25 0.313,0.156 10 false *b
*a MAX Line
*b MIN Line


Check the fluid level.

If the brake fluid level is lower than the MIN line, inspect for brake fluid leaks and brake pad wear. If necessary, refill the reservoir with brake fluid to the MAX line after repair or replacement.

Brake Fluid:

SAE J1703 or FMVSS No. 116 DOT3

SAE J1704 or FMVSS No. 116 DOT4


NOTICE:

If using a dropper to adjust the fluid amount, make sure that the dropper has not been used with mineral oils, water or deteriorated brake fluid. Sealed areas may deteriorate and lead to fluid leaks, or the fluid may deteriorate and lead to decreased efficiency.


HINT:

The brake fluid level must always be adjusted to the MAX line.