Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE MASTER CYLINDER(for LHD)
RM3160E _54 Brake _019693 BRAKE SYSTEM (OTHER) _0108088 BRAKE MASTER CYLINDER(for LHD) A

BRAKE SYSTEM (OTHER)  BRAKE MASTER CYLINDER(for LHD)  DISASSEMBLY  


PROCEDURE

Hide 47311K 1.REMOVE BRAKE MASTER CYLINDER TO WAY TUBE

a.

Secure the brake master cylinder sub-assembly with way in a vise.

NOTICE:

Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly and No. 2 brake tube way.



b.
C292885

Using a union nut wrench, remove the brake master cylinder to way tube.

NOTICE:
·

Do not damage or deform the brake lines during the removal procedure.

·

Do not allow any foreign matter such as dirt or dust to enter the brake lines from the connecting parts.




c.

Remove the brake master cylinder sub-assembly and No. 2 brake tube way from the vise.


Hide 47392A 2.REMOVE NO. 2 BRAKE TUBE WAY

Hide 47201 3.REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY

Hide 47201C 4.REMOVE BRAKE MASTER CYLINDER RING PIN

a.

Secure the brake master cylinder sub-assembly in a vise.

NOTICE:

Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.



b.
C292887

Using a 5 mm pin punch and a hammer, tap out the brake master cylinder ring pin from the brake master cylinder sub-assembly.

NOTICE:

Do not drop the brake master cylinder reservoir assembly.



Hide 47202 5.REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY

a.

Remove the brake master cylinder reservoir sub-assembly from the brake master cylinder body.


Hide 47255 6.REMOVE MASTER CYLINDER RESERVOIR GROMMET

a.
C296078

Remove the 2 master cylinder reservoir grommets from the brake master cylinder body.


b.

Remove the brake master cylinder body from the vise.