85035
1.INSPECT WASHER NOZZLE SUB-ASSEMBLY
Operate the washer nozzle sub-assemblies and check the position that the washer fluid hits the windshield glass.
Washer fluid hits the windshield glass in the areas shown in the illustration.
| *a | Vehicle Center Line | - | - |
|
Measurement | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 398.3 mm (1.30 ft.) | B | 135.3 mm (5.33 in.) |
| C | 149.7 mm (5.89 in.) | - | - |
If the result is not as specified, replace the washer nozzle sub-assembly.