Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE(for Front Side) › 2013.12–2016.11
RM3160E _59 Vehicle Exterior _019721 WIPER / WASHER _0101302 WASHER NOZZLE(for Front Side) A

WIPER / WASHER  WASHER NOZZLE(for Front Side)  REMOVAL  


PROCEDURE

Hide 85035 1.REMOVE WASHER NOZZLE SUB-ASSEMBLY

a.
E288260C01
0.406,2.281 0.885,1.813 true 0.281,2.292 0.531,2.552 0.25,0.26 10 true *a 2.125,1.125 2.333,1.396 0.208,0.271 10 false 1 2.813,0.802 3.021,1.073 0.208,0.271 10 false 2
*a Protective Tape


Using a screwdriver, disengage the 2 claws as indicated by the arrows, in the order shown in the illustration to separate the washer nozzle sub-assembly.

NOTICE:

Be careful not to damage the windshield glass.


HINT:
·

Tape the screwdriver tip before use.


·

Use the same procedure for the LH side and RH side.




b.
E288261

Remove the washer nozzle sub-assembly from the washer hose.

NOTICE:

Washer nozzle sub-assemblies cannot be reused.