85345R
1.INSPECT REAR WASHER NOZZLE
for Fixed Glass Type:
Operate the rear washer nozzle and check the position that the washer fluid hits the back door glass.
Washer fluid hits the back door glass in the area shown in the illustration.
| *a | Vehicle Center Line | *b | Edge of Back Door Glass |
|
Measurement | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 80.3 mm (3.16 in.) | B | 32.4 mm (1.28 in.) |
| C | 65.4 mm (2.57 in.) | D | 73.6 mm (2.90 in.) |
| E | 77.0 mm (3.03 in.) | F | 87.8 mm (3.46 in.) |
| G | 29.9 mm (1.18 in.) | H | 86.6 mm (3.41 in.) |
If the result is not as specified, replace the rear washer nozzle.
for Glass Hatch Type:
Operate the rear washer nozzle and check the position that the washer fluid hits the back door glass.
Washer fluid hits the back door glass in the area shown in the illustration.
| *a | Vehicle Center Line | *b | Edge of Back Door Glass |
|
Measurement | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 80.3 mm (3.16 in.) | B | 32.4 mm (1.28 in.) |
| C | 68.6 mm (2.70 in.) | D | 76.7 mm (3.02 in.) |
| E | 80.2 mm (3.16 in.) | F | 91.0 mm (3.58 in.) |
| G | 29.9 mm (1.18 in.) | H | 86.6 mm (3.41 in.) |
If the result is not as specified, replace the rear washer nozzle.