Home › Audio / Visual / Telematics › AUDIO / VIDEO › DIGITAL AUDIO BROADCASTING ANTENNA
RM3160E _56 Audio / Visual / Telematics _019700 AUDIO / VIDEO _0108142 DIGITAL AUDIO BROADCASTING ANTENNA A

AUDIO / VIDEO  DIGITAL AUDIO BROADCASTING ANTENNA  INSTALLATION  


PROCEDURE

Hide 863C0 1.INSTALL DIGITAL AUDIO BROADCASTING ANTENNA ASSEMBLY

HINT:

Butyl tape and adhesive tape are not available as supply parts. If these pieces of tape still have enough adhesion to secure the digital audio broadcasting antenna assembly to the roof headlining assembly, reuse them. If the adhesive tape and/or the butyl tape is no longer sticky, apply new tape following the procedure below.


a.

Apply new butyl tape.

E287585C01
3.5,1.146 3.5,0.729 false 3.5,0.979 3.833,0.979 3.833,0.979 3.833,0.313 true 3.438,1.167 3.75,1.365 0.313,0.198 10 false *a
*a Marking - -
V100155

Butyl tape
V100136

Front


i.

Remove the old butyl tape from the roof headlining assembly.


ii.

Prepare the appropriate amount of new butyl tape.

HINT:

Be careful not to touch the adhesive surface.



iii.

Apply the butyl tape to the roof headlining assembly while aligning the tape with the markings on the roof headlining assembly.


iv.

Peel off the release paper from the butyl tape.



b.

Engage the clamp.

E287584C02
5.667,3.5 5.417,3.417 true 5.865,3.021 5.698,2.823 true 5.667,3.417 5.979,3.573 0.313,0.156 10 true *a 5.854,3.01 6.167,3.167 0.313,0.156 10 true *b
*a Protrusion *b Adjustment Area
V100155

Adhesive Tape
V100143

Marking Tape
V100136

Front - -



c.

Connect the connector.


d.

Install the digital audio broadcasting antenna assembly to the roof headlining assembly from the center of the roof headlining assembly.


e.

Put the pieces of tape back to the positions shown in the illustration in order to secure the digital audio broadcasting antenna assembly with No. 1 amplifier antenna assembly to the roof headlining assembly.

HINT:
·

If the tape is no longer sticky, use other tape, such as packing tape, that has enough adhesion to secure the antenna cord to the roof headlining assembly.

·

Align the marking tape on the digital audio broadcasting antenna assembly with the protrusion of the roof headlining assembly, and wrap tape around the digital audio broadcasting antenna assembly and roof headlining assembly once or twice to securely hold them.

·

Secure the extra length of the digital audio broadcasting antenna assembly in the adjustment area shown in the illustration.




Hide 2.INSTALL ROOF HEADLINING ASSEMBLY