Home › Vehicle Interior › DOOR LOCK › TRANSMITTER BATTERY(w/ Smart Entry and Start System)
RM3160E _58 Vehicle Interior _019705 DOOR LOCK _0098503 TRANSMITTER BATTERY(w/ Smart Entry and Start System) A

DOOR LOCK  TRANSMITTER BATTERY(w/ Smart Entry and Start System)  REPLACEMENT  


PROCEDURE

Hide 89745C 1.REMOVE TRANSMITTER BATTERY

NOTICE:

Take extra care when handling these precision electronic components.


a.

for Type A:

i.
B274647
3.042,0.948 3.198,1.146 0.156,0.198 10 false 1 1.448,1.896 1.604,2.094 0.156,0.198 10 false 2

Push the release hook button and remove the mechanical key.


ii.
B274649
0.708,1.594 0.979,1.792 false 1.031,1.74 1.469,2.042 0.438,0.302 10 *a
*a Protective Tape


Insert a precision screwdriver into the gap, and turn the screwdriver to remove the transmitter housing cover.

HINT:

Tape the screwdriver tip before use.



iii.
B274650
1.865,0.979 2.135,1.188 false 2.177,1.115 2.552,1.406 0.375,0.292 10 *a
*a Protective Tape


Insert a precision screwdriver into the gap and gently remove the transmitter battery.

NOTICE:
·

Do not push the terminals with your finger.

·

Do not forcibly pry up the transmitter battery as the terminals may be damaged.

·

Do not touch the transmitter battery with wet hands. Moisture may cause rust.

·

Do not touch or move any components inside the transmitter. It may interfere with proper operation.

·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.



HINT:

Tape the screwdriver tip before use.




b.

for Type B:

i.
B274647

Push the release hook button and remove the mechanical key.


ii.
B274649
0.708,1.594 0.979,1.792 false 1.021,1.729 1.354,1.917 0.333,0.188 10 false *a
*a Protective Tape


Insert a precision screwdriver into the gap, and turn the screwdriver to remove the transmitter housing cover.

HINT:

Tape the screwdriver tip before use.



iii.
B279136

Disengage the 2 claws to remove the cover.


iv.
B279137
0.865,0.729 1.26,0.417 false 1.323,0.333 1.604,0.615 0.281,0.281 10 false *a
*a Protective Tape


Insert a precision screwdriver into the gap and gently remove the transmitter battery.

NOTICE:
·

Do not push the terminals with your finger.

·

Do not forcibly pry up the transmitter battery as the terminals may be damaged.

·

Do not touch the transmitter battery with wet hands. Moisture may cause rust.

·

Do not touch or move any components inside the transmitter. It may interfere with proper operation.

·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.



HINT:

Tape the screwdriver tip before use.




Hide 89745C 2.INSTALL TRANSMITTER BATTERY

a.

for Type A:

i.
B279133

Install a new transmitter battery with the positive (+) side facing upward, as shown in the illustration.

NOTICE:
·

Do not bend the transmitter battery electrode during installation.

·

Keep the inside of the transmitter housing cover free of dust and oil.

·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.




ii.
B279134

Install the transmitter housing cover by pressing down on it as shown in the illustration.


iii.
B274648

Install the transmitter housing cover by pressing down on it as shown in the illustration.


iv.

Press one of the transmitter switches and check that the LED illuminates.

OK:

Transmitter LED illuminates when a switch is pressed.




b.

for Type B:

i.
B279138

Install a new transmitter battery with the positive (+) side facing upward, as shown in the illustration.

NOTICE:
·

Do not bend the transmitter battery electrode during installation.

·

Keep the inside of the transmitter housing cover free of dust and oil.

·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.




ii.
B279929

Engage the 2 claws to install the cover.


iii.
B279134

Install the transmitter housing cover by pressing down on it as shown in the illustration.


iv.
B274648

Insert the mechanical key into the transmitter.


v.

Press one of the transmitter switches and check that the LED illuminates.

OK:

Transmitter LED illuminates when a switch is pressed.