Home › Vehicle Interior › DOOR LOCK › TRANSMITTER BATTERY(w/o Smart Entry and Start System)
RM3160E _58 Vehicle Interior _019705 DOOR LOCK _0098504 TRANSMITTER BATTERY(w/o Smart Entry and Start System) A

DOOR LOCK  TRANSMITTER BATTERY(w/o Smart Entry and Start System)  REPLACEMENT  


PROCEDURE

Hide 89751A 1.REMOVE TRANSMITTER HOUSING COVER

a.
B279140
1.594,1.729 2.146,1.625 false 2.208,1.542 2.458,1.74 0.25,0.198 10 false *a
*a Protective Tape


Using a precision screwdriver with its tip wrapped with protective tape, remove the transmitter housing cover.

NOTICE:

Do not forcibly pry the cover.


HINT:

Open the transmitter housing cover as shown in the illustration so as not to drop the button.



Hide 89071B 2.REMOVE DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY

a.
B279142
1.458,0.917 1.906,0.521 false 1.979,0.385 2.229,0.583 0.25,0.198 10 false *a
*a Protective Tape


Using a precision screwdriver with its tip wrapped with protective tape, remove the door control transmitter module set sub-assembly from the transmitter housing case.

NOTICE:

Handle each part with care as they are delicate electrical parts.


HINT:

When removing the module, take care not to drop the button.



Hide 89745A 3.REMOVE TRANSMITTER BATTERY

a.
B279144

Using a coin, twist it as shown in the illustration, and remove the transmitter battery cover.


b.
B279146

Remove the transmitter battery.

NOTICE:
·

Do not push the terminals with your finger.

·

Do not forcibly pry up the transmitter battery as the terminals may be damaged.

·

Do not touch the transmitter battery with wet hands. Moisture may cause rust.

·

Do not touch or move any components inside the transmitter. It may interfere with proper operation.

·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.




Hide 89745A 4.INSTALL TRANSMITTER BATTERY

a.
B279147

Install a new transmitter battery with the positive (+) side facing upward, as shown in the illustration.

NOTICE:
·

Be careful not to bend the transmitter battery electrode during installation.

·

Keep the inside of the transmitter housing cover free of dust and oil.

·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.




b.
B279145

Install the transmitter battery cover.


Hide 89071B 5.INSTALL DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY

a.
B279143

Install the door control transmitter module set sub-assembly into the transmitter housing case.


Hide 89751A 6.INSTALL TRANSMITTER HOUSING COVER

a.
B279141

Install the transmitter housing cover to the transmitter housing case.