Home › Vehicle Interior › DOOR LOCK › BACK DOOR LOCK
RM3160E _58 Vehicle Interior _019705 DOOR LOCK _0098511 BACK DOOR LOCK A

DOOR LOCK  BACK DOOR LOCK  INSTALLATION  


PROCEDURE

Hide 69350 1.INSTALL BACK DOOR LOCK ASSEMBLY (w/o Power Back Door)

a.

Apply MP grease to the sliding parts of the back door lock assembly.


b.
B362969N01
2.719,0.719 2.948,0.99 0.229,0.271 10 true 1 0.792,0.302 1.021,0.573 0.229,0.271 10 true 2 0.719,0.813 0.948,1.083 0.229,0.271 10 true 3

Install the back door lock assembly with the 3 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)

HINT:

Tighten the bolts in the order shown in the illustration.



c.

Connect the connector.


Hide 69350 2.INSTALL BACK DOOR LOCK ASSEMBLY (w/ Power Back Door)

HINT:

Make sure to remove the string before installing a new back door lock assembly.


a.

Apply MP grease to the sliding parts of the back door lock assembly.


b.
B362968N01
2.917,0.615 3.198,0.875 0.281,0.26 10 true 1 0.896,0.292 1.177,0.552 0.281,0.26 10 true 2 0.802,0.698 1.083,0.958 0.281,0.26 10 true 3 1.406,1.813 1.688,2.073 0.281,0.26 10 true 4

Install the back door lock assembly with the 4 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)

HINT:

Tighten the bolts in the order shown in the illustration.



c.

Engage the clamp.


d.

Connect the connector.


Hide 64780A 3.INSTALL BACK DOOR TRIM PANEL ASSEMBLY

Hide 67766 4.INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER

Hide 67765A 5.INSTALL NO. 1 BACK DOOR SERVICE HOLE COVER

Hide 64798 6.INSTALL BACK DOOR LOCK COVER (for Glass Hatch Type)

Hide 64792 7.INSTALL BACK DOOR TRIM COVER LH

Hide 64791C 8.INSTALL BACK DOOR TRIM COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 64783A 9.INSTALL BACK WINDOW UPPER TRIM PANEL