Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
84280D
1.INSTALL POWER BACK DOOR SENSOR ASSEMBLY
Engage the 3 clips.
Install the power back door sensor assembly with the 5 screws.
Connect the connector.
64780A
2.INSTALL BACK DOOR TRIM PANEL ASSEMBLY
67766
3.INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER
67765A
4.INSTALL NO. 1 BACK DOOR SERVICE HOLE COVER
64798
5.INSTALL BACK DOOR LOCK COVER (for Glass Hatch Type)
64792
6.INSTALL BACK DOOR TRIM COVER LH
64791C
7.INSTALL BACK DOOR TRIM COVER RH
Use the same procedure as for the LH side.
64783A
8.INSTALL BACK WINDOW UPPER TRIM PANEL