When replacing the multiplex network door ECU, the back door automatic open stop position (memory stopped position) must be registered, so be sure to make a note of the automatic open stop position.
89222A
1.INSTALL MULTIPLEX NETWORK DOOR ECU
Engage the guide and clip.
Install the multiplex network door ECU with the 2 screws.
Connect the 2 connectors.
64780A
2.INSTALL BACK DOOR TRIM PANEL ASSEMBLY
67766
3.INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER
67765A
4.INSTALL NO. 1 BACK DOOR SERVICE HOLE COVER
64798
5.INSTALL BACK DOOR LOCK COVER (for Glass Hatch Type)
64792
6.INSTALL BACK DOOR TRIM COVER LH
64791C
7.INSTALL BACK DOOR TRIM COVER RH
Use the same procedure as for the LH side.
64783A
8.INSTALL BACK WINDOW UPPER TRIM PANEL
9.INITIALIZE POWER BACK DOOR SYSTEM
10.INSPECT POWER BACK DOOR SYSTEM
11.INSPECT BACK DOOR CLOSER SYSTEM