Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR SUPPORT
RM3160E _59 Vehicle Exterior _019719 DOOR / HATCH _0108198 BACK DOOR SUPPORT A

DOOR / HATCH  BACK DOOR SUPPORT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 68960 1.REMOVE BACK DOOR STAY ASSEMBLY

NOTICE:
·

Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinder while servicing.

·

Do not wear cotton gloves or other similar materials when handling the piston rod. Fibers may attach to the rod and result in gas leaks.

·

Do not apply any horizontal load to the door stay in order to prevent the piston rod from deforming.



a.
B363200
3.052,2.833 2.896,2.563 true 0.542,1.021 0.333,0.823 true 0.583,0.969 0.865,1.125 0.281,0.156 10 true *a 3,2.844 3.281,3 0.281,0.156 10 true *a 0.125,0.354 0.281,0.552 0.156,0.198 10 true 1 0.75,0.198 0.906,0.396 0.156,0.198 10 true 2 2.521,2.125 2.677,2.323 0.156,0.198 10 true 1 2.375,2.469 2.531,2.667 0.156,0.198 10 true 2
*a Protective Tape


Using a screwdriver, remove the 2 stop rings as indicated by the arrows, in the order shown in the illustration.

HINT:

Tape the screwdriver tip before use.



b.

Release the ball joint and remove the back door stay assembly.

NOTICE:

Remove the back door stay assembly while supporting the back door by hand.



Hide 68946 2.REMOVE BACK DOOR DAMPER STAY UPPER BRACKET

a.
B363201

Remove the 2 bolts and back door damper stay upper bracket.


Hide 68948 3.REMOVE BACK DOOR DAMPER STAY LOWER BRACKET

a.
B363202

Remove the 2 bolts and back door damper stay lower bracket.