77030A
1.INSPECT FUEL LID LOCK WITH MOTOR ASSEMBLY
Check the operation of the fuel lid lock with motor assembly.
| *a | Component without harness connected
(Fuel Lid Lock with Motor Assembly) |
| *b | Shaft Stroke |
| *c | Lock |
| *d | Unlock |
Apply battery voltage to the fuel lid lock with motor assembly connector, and check that the fuel lid lock with motor assembly operates smoothly as follows.
| Connection | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2 |
Unlock |
If the result is not as specified, replace the fuel lid lock with motor assembly.
Measure the shaft stroke.
| Area | Condition | Specified Condition |
|---|---|---|
| Shaft stroke | Unlock | 0 mm
(0 in.) |
| Lock | 10 mm
(0.394 in.) |
If the result is not as specified, replace the fuel lid lock with motor assembly.