Home › Vehicle Interior › SEAT BELT › REAR NO. 2 SEAT INNER BELT ASSEMBLY
RM3160E _58 Vehicle Interior _019713 SEAT BELT _0108222 REAR NO. 2 SEAT INNER BELT ASSEMBLY A

SEAT BELT  REAR NO. 2 SEAT INNER BELT ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 73580A 1.INSTALL REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY (for LH Side)

a.
B362479C02
0.958,1.031 1.323,1.344 true 2.75,0.969 3.031,1.302 true 3,1.302 3.219,1.51 0.219,0.208 10 false *a 1.313,1.344 1.531,1.552 0.219,0.208 10 false *a
*a Rubber Band


Pass the rear No. 2 seat inner belt sub-assembly through the rubber band of the rear seat cushion assembly as shown in the illustration.


b.
B362489C01
0,0 0,0 false
V100155

Protruding Part


Install the floor anchor of the rear No. 2 seat inner belt sub-assembly with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the rear No. 2 seat inner belt sub-assembly to overlap the protruding parts of the floor panel.



Hide 73580A 2.INSTALL REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY (for RH Side)

a.
B362477

Pass the rear No. 2 seat inner belt sub-assembly through the rear seat cushion assembly as shown in the illustration.


b.
B362487C01
0,0 0,0 false
V100155

Protruding Part


Install the floor anchor of the rear No. 2 seat inner belt sub-assembly with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the rear No. 2 seat inner belt sub-assembly to overlap the protruding parts of the floor panel.



Hide 64993 3.INSTALL REAR DECK FLOOR BOX

Hide 64742C 4.INSTALL DECK SIDE TRIM BOX LH

Hide 64910J 5.INSTALL TONNEAU COVER ASSEMBLY

Hide 58409A 6.INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

Hide 58410B 7.INSTALL DECK BOARD ASSEMBLY