Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT OUTER BELT ASSEMBLY
RM3160E _58 Vehicle Interior _019713 SEAT BELT _0108223 REAR NO. 1 SEAT OUTER BELT ASSEMBLY G

SEAT BELT  REAR NO. 1 SEAT OUTER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73370C 1.INSPECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY

a.
B357796
1.792,1.927 2.521,1.927 2.521,1.927 2.156,1.656 false 2.604,1.844 2.917,2 0.313,0.156 10 false *a 2.323,0.031 2.635,0.188 0.313,0.156 10 false *b 0.51,0.667 0.823,0.823 0.313,0.156 10 false *c 1.188,0.26 1.5,0.417 0.313,0.156 10 false *d
*a Retractor
*b Unlock
*c Lock
*d 45°


Before installing the rear No. 1 seat outer belt assembly, check the ELR function.

NOTICE:

Do not disassemble the retractor.


i.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

If the result is not as specified, replace the rear No. 1 seat outer belt assembly.