Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT OUTER BELT ASSEMBLY(for Rear No. 1 Seat)
RM3160E _58 Vehicle Interior _019713 SEAT BELT _0108227 REAR CENTER SEAT OUTER BELT ASSEMBLY(for Rear No. 1 Seat) G

SEAT BELT  REAR CENTER SEAT OUTER BELT ASSEMBLY(for Rear No. 1 Seat)  INSPECTION  


PROCEDURE

Hide 73350A 1.INSPECT REAR NO. 1 CENTER SEAT LAP TYPE BELT ASSEMBLY

a.
B357797
1.625,1.927 2,1.927 false 2.063,1.844 2.469,2.031 0.406,0.188 10 false *a 2.5,0.792 2.813,0.948 0.313,0.156 10 false *f 1.302,0.094 1.615,0.25 0.313,0.156 10 false *b 1.813,0.156 2.125,0.313 0.313,0.156 10 false *c 2.229,0.281 2.542,0.438 0.313,0.156 10 false *d 1.156,0.323 1.469,0.479 0.313,0.156 10 false *f 1.896,0.396 2.208,0.552 0.313,0.156 10 false *e
*a Retractor
*b 0°
*c 19°
*d 33°
*e Unlock
*f Lock


Before installing the rear No. 1 center seat lap type belt assembly, check the ELR function.

NOTICE:

Do not disassemble the retractor.


i.

When the inclination of the retractor is between 19° and 33°, check that the belt can be pulled from the retractor. When the inclination of the retractor is less 19° or more than 33°, check that the belt locks.

If the result is not as specified, replace the rear No. 1 center seat lap type belt assembly.