Home › Engine / Hybrid System › 1AR-FE FUEL › FUEL PUMP
RM3160E _51 Engine / Hybrid System _019673 1AR-FE FUEL _0108299 FUEL PUMP A

1AR-FE FUEL  FUEL PUMP  REASSEMBLY  


PROCEDURE

Hide 23221 1.INSTALL FUEL PUMP

HINT:

Perform "Inspection After Repair" after replacing the fuel pump.

Click hereEngine / Hybrid System>1AR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION


a.
A288172
2.052,0.75 2.5,0.75 false 2.063,0.604 2.25,0.333 2.25,0.333 2.5,0.333 false 2.563,0.281 2.875,0.438 0.313,0.156 10 *1 2.563,0.688 2.875,0.844 0.313,0.156 10 *2
*1 O-ring
*2 Fuel Pump Spacer


Apply gasoline to a new O-ring. Then install the O-ring and fuel pump spacer to the fuel pump.


b.

Connect the fuel pump harness connector.


c.

Engage the 5 claws and install the fuel pump to the fuel filter.

NOTICE:
·

Do not damage the fuel filter.

·

Do not remove the suction filter from the fuel pump.

·

Do not use either the fuel pump or suction filter if the suction filter is removed from the fuel pump.




d.

Engage the 2 claws and install the No. 1 fuel suction support.


e.
A314722

Engage the claw and connect the fuel pump filter hose while aligning it with the installation position of the fuel sub-tank.

NOTICE:

Do not apply excessive force to the fuel tube or No. 1 fuel suction support.



f.

Engage the 2 claws and install the fuel filter, fuel pump and spring to the fuel sub-tank.


g.

Install a new E-ring to the fuel suction plate shaft.


h.

Connect the fuel pump harness connector.


i.

Connect the fuel pump harness to the harness clamp.

NOTICE:

Do not damage the fuel pump harness.



Hide 83320 2.INSTALL FUEL SENDER GAUGE ASSEMBLY