Home › Engine / Hybrid System › 2GR-FE FUEL › FUEL PUMP › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019664 2GR-FE FUEL _0108304 FUEL PUMP A

2GR-FE FUEL  FUEL PUMP  REASSEMBLY  


PROCEDURE

Hide 23221 1.INSTALL FUEL PUMP

HINT:

Perform "Inspection After Repair" after replacing the fuel pump.

Click hereEngine / Hybrid System>2GR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION


a.
A204256C02
1.323,0.51 1.073,0.26 1.073,0.26 0.854,0.26 false 1.271,1.083 1.021,1.365 1.021,1.365 0.854,1.365 false 0.656,0.177 0.813,0.333 0.156,0.156 10 false *1 0.667,1.292 0.823,1.448 0.156,0.156 10 false *2
*1 Fuel Pump Filter Seal
*2 Fuel Pump Spacer


Apply gasoline to a new fuel pump filter seal. Then install the fuel pump filter seal and fuel pump spacer to the fuel pump.


b.

Connect the fuel pump harness connector.


c.

Engage the 5 claws and install the fuel pump to the fuel filter.

NOTICE:
·

Do not damage the fuel filter.

·

Do not remove the suction filter from the fuel pump.

·

Do not use either the fuel pump or suction filter if the suction filter is removed from the fuel pump.




d.

Engage the 2 claws and install the No. 1 fuel suction support.


e.
A314722

Engage the claw and connect the fuel pump filter hose while aligning it with the installation position of the fuel sub-tank.

NOTICE:

Do not apply excessive force to the fuel tube or No. 1 fuel suction support.



f.

Engage the 2 claws and install the fuel filter, fuel pump and spring to the fuel sub-tank.


g.

Install a new E-ring to the fuel suction plate shaft.


h.

Connect the fuel pump harness connector.


i.

Connect the fuel pump harness to the harness clamp.

NOTICE:

Do not damage the fuel pump harness.



Hide 83320 2.INSTALL FUEL SENDER GAUGE ASSEMBLY