Home › Engine / Hybrid System › 2GR-FE FUEL › FUEL SENDER GAUGE ASSEMBLY › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019664 2GR-FE FUEL _0108306 FUEL SENDER GAUGE ASSEMBLY G

2GR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

a.

Check that the float moves smoothly between F and E.


b.
A315512C01
0.688,0.229 2.677,1.802 1.99,1.573 0.448,2.385 1,2.385 false 0.427,4.292 0.979,4.292 false 0.76,0.271 1.073,0.427 0.313,0.156 10 false *a 0.323,2.302 0.479,2.5 0.156,0.198 10 false F 0.292,4.219 0.448,4.417 0.156,0.198 10 false E
*a Component without harness connected
(Fuel Sender Gauge Assembly)


Inspect the fuel sender gauge assembly resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Float Level Specified Condition
1 - 2 F 13.5 to 16.5 Ω
Between F and E 13.5 to 414.5 Ω (Gradually changes)
E 405.5 to 414.5 Ω


If the result is not as specified, replace the fuel sender gauge assembly.