Home › Vehicle Interior › METER / GAUGE / DISPLAY › COMBINATION METER
RM3160E _58 Vehicle Interior _019708 METER / GAUGE / DISPLAY _0108488 COMBINATION METER A

METER / GAUGE / DISPLAY  COMBINATION METER  INSTALLATION  


PROCEDURE

Hide 83100 1.INSTALL COMBINATION METER ASSEMBLY

a.

Connect the 2 connectors.


b.
B362297

Engage the 2 clips as shown in the illustration.


c.

Install the combination meter assembly with the 2 screws.


Hide 55410C 2.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

a.
B362294

Engage the 2 guides and 9 claws as shown in the illustration.


b.
B362292

Engage the 2 guides and 4 clips to install the instrument cluster finish panel assembly as shown in the illustration.


Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION