Home › Vehicle Interior › METER / GAUGE / DISPLAY › CLOCK
RM3160E _58 Vehicle Interior _019708 METER / GAUGE / DISPLAY _0108489 CLOCK G

METER / GAUGE / DISPLAY  CLOCK  INSPECTION  


PROCEDURE

Hide 83910 1.INSPECT CLOCK ASSEMBLY

a.
B357866
0.969,1.625 0.969,0.917 false 1.677,1.625 1.677,1 false 2.115,1.625 2.115,1.01 false 2.552,1.625 2.552,1 false 0.917,1.667 1.135,1.917 0.219,0.25 10 false *a 1.615,1.667 1.927,1.823 0.313,0.156 10 false *b 2.063,1.667 2.375,1.823 0.313,0.156 10 false *c 2.49,1.667 2.802,1.823 0.313,0.156 10 false *d 0.323,2.104 0.667,2.469 0.344,0.365 10 false *e
*a Security Indicator Light
*b Rear seat belt warning light (LH) (w/ Rear Seat Belt Warning)
*c Rear seat belt warning light (center) (w/ Rear Seat Belt Warning)
*d Rear seat belt warning light (RH) (w/ Rear Seat Belt Warning)
*e Component without harness connected
(Clock Assembly)


Apply battery voltage to the clock assembly and check that the indicator light illuminates.

OK:
Battery Connection Specified Condition
Battery positive (+) → Terminal 9
Battery negative (-) → Terminal 8
Security indicator light comes on
Battery positive (+) → Terminal 11*
Battery negative (-) → Terminal 8*
Rear seat belt warning light (RH) comes on
Battery positive (+) → Terminal 12*
Battery negative (-) → Terminal 8*
Rear seat belt warning light (center) comes on
Battery positive (+) → Terminal 13*
Battery negative (-) → Terminal 8*
Rear seat belt warning light (LH) comes on


*: w/ Rear Seat Belt Warning


If the result is not as specified, replace the clock assembly.