Home › General › SPECIFICATIONS › DRIVE SHAFT / PROPELLER SHAFT › 2013.12–2016.11
RM3160E _V1 General _019682 SPECIFICATIONS _0095386 DRIVE SHAFT / PROPELLER SHAFT F

SPECIFICATIONS  DRIVE SHAFT / PROPELLER SHAFT  TORQUE SPECIFICATIONS  


Front Drive Shaft Assembly
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
No. 1 drive shaft bearing bracket setting bolt 32.4 330 24
Front speed sensor x Steering knuckle 8.5 87 75
Front speed sensor x Front shock absorber assembly 18.8 192 14
Front drive shaft assembly x Front axle shaft nut 294 2998 217
Front wheel 103 1050 76

Propeller shaft assembly
Part Tightened N*m kgf*cm ft.*lbf
Universal joint flange nut 1st 181.5 1851 134
2nd 68.7 701 51
Intermediate shaft assembly x Propeller shaft assembly 73.5 749 54
Propeller with center bearing shaft assembly x Electro magnetic control coupling sub-assembly 73.5 749 54
Cross groove joint set bolt 26 265 19
No. 2 center support bearing assembly set bolt 36.8 375 27