Home › Brake › BRAKE (FRONT) › FRONT BRAKE
RM3160E _54 Brake _019694 BRAKE (FRONT) _0109275 FRONT BRAKE A

BRAKE (FRONT)  FRONT BRAKE  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the LH side and RH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 2.DRAIN BRAKE FLUID

NOTICE:

If brake fluid leaks onto any painted surface, immediately wash it off.


Hide 47313J 3.DISCONNECT FRONT FLEXIBLE HOSE

a.
C291535

Remove the union bolt and gasket, and disconnect the front flexible hose from the front disc brake cylinder assembly.


Hide 47750 4.REMOVE FRONT DISC BRAKE CYLINDER ASSEMBLY

a.
C291512
0.99,1.604 1.302,1.76 0.313,0.156 10 false *a 1.625,1.948 1.938,2.104 0.313,0.156 10 false *b
*a Turn
*b Hold


Hold the 2 front disc brake cylinder slide pins and remove the 2 bolts and front disc brake cylinder assembly.


Hide 5.REMOVE FRONT DISC BRAKE PAD

a.
C291513

Remove the 2 anti-squeal springs.


b.
C291514

Remove the 2 front disc brake pads from the front disc brake cylinder mounting.


Hide 04945 6.REMOVE FRONT DISC BRAKE ANTI-SQUEAL SHIM KIT

a.

Remove the front disc brake anti-squeal shim from each front disc brake pad.


b.
C291515

Using a screwdriver, remove the front disc brake pad wear indicator plate from each front disc brake pad.


Hide 7.REMOVE FRONT DISC BRAKE PAD SUPPORT PLATE

a.
C291516

Remove the 4 front disc brake pad support plates from the front disc brake cylinder mounting.

NOTICE:

Each front disc brake pad support plate has a different shape. Be sure to put an identification mark on each front disc brake pad support plate so that it can be reinstalled to its original position.



Hide 47715A 8.REMOVE FRONT NO. 1 DISC BRAKE CYLINDER SLIDE PIN

a.
C291517

Remove the front No. 1 disc brake cylinder slide pin from the front disc brake cylinder mounting.


Hide 47715D 9.REMOVE FRONT NO. 2 DISC BRAKE CYLINDER SLIDE PIN

a.
C291518

Remove the front No. 2 disc brake cylinder slide pin from the front disc brake cylinder mounting.


b.
C291519
2.292,1.344 2.594,1.104 2.594,1.104 2.844,1.104 false 2.885,1.021 3.198,1.177 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, remove the front disc brake cylinder slide bushing from the front No. 2 disc brake cylinder slide pin.

NOTICE:

Do not damage the front No. 2 disc brake cylinder slide pin.



Hide 10.REMOVE FRONT DISC BRAKE BUSHING DUST BOOT

a.
C291520

Remove the 2 front disc brake bushing dust boots from the front disc brake cylinder mounting.


Hide 47722 11.REMOVE FRONT DISC BRAKE CYLINDER MOUNTING

a.
C291521

Remove the 2 bolts and front disc brake cylinder mounting from the steering knuckle.


Hide 43512 12.REMOVE FRONT DISC

a.
C291522
1.917,1.01 2.833,0.969 2.833,0.969 1.927,1.052 true 2.875,0.885 3.188,1.042 0.313,0.156 10 false *a
*a Matchmark


Put matchmarks on the front disc and the front axle hub sub-assembly.


b.

Remove the front disc.