Home › Brake › BRAKE (REAR) › REAR BRAKE
RM3160E _54 Brake _019695 BRAKE (REAR) _0109277 REAR BRAKE A

BRAKE (REAR)  REAR BRAKE  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the LH side and RH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 2.DRAIN BRAKE FLUID

NOTICE:

If brake fluid leaks onto any painted surface, immediately wash it off.


Hide 47319F 3.DISCONNECT REAR FLEXIBLE HOSE

a.
C291571

Remove the union bolt and gasket, and disconnect the rear flexible hose from the rear disc brake cylinder assembly.


Hide 47850 4.REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY

a.
C291539
1.521,0.26 1.781,0.479 0.26,0.219 10 false *a 1,0.594 1.271,0.813 0.271,0.219 10 false *b
*a Turn
*b Hold


Hold the 2 rear disc brake cylinder slide pins and remove the 2 bolts and rear disc brake cylinder assembly.


Hide 04466 5.REMOVE REAR DISC BRAKE PAD

a.
C291540

Remove the 2 rear disc brake pads from the rear disc brake cylinder mounting.


Hide 04946 6.REMOVE REAR DISC BRAKE ANTI-SQUEAL SHIM KIT

a.

Remove the rear disc brake anti-squeal shim from each rear disc brake pad.


b.
C291541

Using a screwdriver, remove the rear disc brake pad wear indicator plate from each rear disc brake pad.


Hide 7.REMOVE REAR DISC BRAKE PAD SUPPORT PLATE

a.
C291542

Remove the 4 rear disc brake pad support plates from the rear disc brake cylinder mounting.

NOTICE:

Each rear disc brake pad support plate has a different shape. Be sure to put an identification mark on each rear disc brake pad support plate so that it can be reinstalled to its original position.



Hide 47815 8.REMOVE REAR NO. 2 DISC BRAKE CYLINDER SLIDE PIN

a.
C291543

Remove the rear No. 2 disc brake cylinder slide pin from the rear disc brake cylinder mounting.


b.
C291545
2.354,1.406 2.49,1 2.49,1 2.76,1 false 2.792,0.917 3.104,1.073 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, remove the rear disc brake cylinder slide bushing from the rear No. 2 disc brake cylinder slide pin.

NOTICE:

Do not damage the rear No. 2 disc brake cylinder slide pin.



Hide 47814 9.REMOVE REAR NO. 1 DISC BRAKE CYLINDER SLIDE PIN

a.
C291544

Remove the rear No. 1 disc brake cylinder slide pin from the rear disc brake cylinder mounting.


Hide 10.REMOVE REAR DISC BRAKE BUSHING DUST BOOT

a.
C291546

Remove the 2 rear disc brake bushing dust boots from the rear disc brake cylinder mounting.


Hide 47722A 11.REMOVE REAR DISC BRAKE CYLINDER MOUNTING

a.
C291547

Remove the 2 bolts and rear disc brake cylinder mounting from the rear axle carrier sub-assembly.


Hide 42491 12.REMOVE PARKING BRAKE SHOE ADJUSTING HOLE PLUG

a.

Remove the parking brake shoe adjusting hole plug.


Hide 42431 13.REMOVE REAR DISC

a.
C291548C01
1.979,0.99 2.854,0.896 2.854,0.896 1.99,1.021 true 2.885,0.813 3.188,1.031 0.302,0.219 10 false *a
*a Matchmark


Put matchmarks on the rear disc and the rear axle hub and bearing assembly.


b.
C201774
0,0 0,0 false
V100135

Contract


Release the parking brake and remove the rear disc.

HINT:

If the rear disc cannot be removed easily, use a screwdriver to turn the shoe adjuster as shown in the illustration in order to contract the parking brake shoes.