Home › Brake › BRAKE (REAR) › REAR BRAKE
RM3160E _54 Brake _019695 BRAKE (REAR) _0109277 REAR BRAKE A

BRAKE (REAR)  REAR BRAKE  DISASSEMBLY  


PROCEDURE

Hide 47831 1.REMOVE REAR DISC BRAKE PISTON

a.
C291549
1.729,0.292 2.135,0.292 false 2.167,0.208 2.479,0.365 0.313,0.156 10 false *a
*a Cloth


Place a piece of cloth between the rear disc brake piston and rear disc brake cylinder.


b.

Apply compressed air to remove the rear disc brake piston from the rear disc brake cylinder.

CAUTION:

Do not place your fingers in front of the rear disc brake piston when using compressed air.


NOTICE:

Do not allow any brake fluid to spatter.



Hide 2.REMOVE CYLINDER BOOT

a.
C291550
1.885,1.208 2.208,1.74 2.208,1.74 2.552,1.74 true 2.583,1.656 2.896,1.813 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, remove the cylinder boot from the rear disc brake cylinder.

NOTICE:

Be careful not to damage the rear disc brake cylinder.



Hide 3.REMOVE PISTON SEAL

a.
C291551
1.573,1.125 1.958,1.771 1.958,1.771 2.198,1.771 true 2.24,1.688 2.552,1.844 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, remove the piston seal from the rear disc brake cylinder.

NOTICE:

Do not damage the inner surface or piston seal groove of the rear disc brake cylinder.



Hide 4.REMOVE REAR DISC BRAKE BLEEDER PLUG CAP

Hide 47547C 5.REMOVE REAR DISC BRAKE BLEEDER PLUG