Home › Brake › BRAKE (REAR) › REAR BRAKE
RM3160E _54 Brake _019695 BRAKE (REAR) _0109277 REAR BRAKE A

BRAKE (REAR)  REAR BRAKE  REASSEMBLY  


PROCEDURE

Hide 47547C 1.TEMPORARILY TIGHTEN REAR DISC BRAKE BLEEDER PLUG

HINT:

Fully tighten the rear disc brake bleeder plug after bleeding the system.


Hide 2.INSTALL REAR DISC BRAKE BLEEDER PLUG CAP

Hide 3.INSTALL PISTON SEAL

a.
C211755
1.365,1.292 1.365,1.281 false
V100155

Lithium Soap Base Glycol Grease


Apply lithium soap base glycol grease to the entire circumference of a new piston seal.


b.

Install the piston seal to the rear disc brake cylinder.

NOTICE:

Securely install the piston seal into the groove of the rear disc brake cylinder.



Hide 47831 4.INSTALL REAR DISC BRAKE PISTON

a.
C291566
0.354,1.167 0.531,1.167 false 0.458,2.292 0.635,2.292 false 0.313,2.219 0.625,2.375 0.313,0.156 10 false *1 0.198,1.083 0.51,1.24 0.313,0.156 10 false *2
*1 Rear Disc Brake Piston
*2 Cylinder Boot
V100155

Lithium Soap Base Glycol Grease


Apply a light layer of lithium soap base glycol grease to the entire circumference of a new cylinder boot.


b.

Install the cylinder boot to the rear disc brake piston.


c.

Apply a light layer of lithium soap base glycol grease to the contact surfaces of the rear disc brake piston, and install it to the rear disc brake cylinder.

NOTICE:

Do not forcibly install the rear disc brake piston into the rear disc brake cylinder.



Hide 5.INSTALL CYLINDER BOOT

a.
C291567

Install the cylinder boot to the rear disc brake cylinder as shown in the illustration.

NOTICE:
·

Securely install the cylinder boot into the groove of the rear disc brake cylinder and groove of the rear disc brake piston.

·

Do not damage the cylinder boot.