Home › Brake › BRAKE (REAR) › REAR BRAKE FLEXIBLE HOSE
RM3160E _54 Brake _019695 BRAKE (REAR) _0109278 REAR BRAKE FLEXIBLE HOSE A

BRAKE (REAR)  REAR BRAKE FLEXIBLE HOSE  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:
·

Because the left and right rear flexible hoses are not interchangeable, verify the part number when installing the rear flexible hoses.

·

If the rear flexible hoses are to be reused, connect them after checking the identification marks placed when each hose was disconnected.



HINT:
·

Use the same procedure for the LH side and RH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 1.INSTALL FLEXIBLE HOSE BRACKET

a.

Install the flexible hose bracket to the rear upper control arm assembly with the bolt.

Torque:
18.8 N*m (192 kgf*cm, 14 ft.*lbf)


Hide 47319F 2.INSTALL REAR FLEXIBLE HOSE

NOTICE:

When installing the rear flexible hose, minimize twisting of the hose.


a.
C291573C01
1.26,0.938 1.469,0.938 1.469,0.938 1.635,1.135 true 1.083,0.854 1.396,1.01 0.313,0.156 10 false *a
*a Identification Mark


Install a new clip to the rear flexible hose.

NOTICE:
·

Install the clip as far as it will go.

·

When installing the rear flexible hose, face the identification mark to the outside of the vehicle.




b.

Using a union nut wrench, connect the brake line to the rear flexible hose while holding the rear flexible hose with a wrench.

Torque:
15.2 N*m (155 kgf*cm, 11 ft.*lbf)

NOTICE:
·

Do not kink or damage the brake line.

·

Do not allow any foreign matter such as dirt or dust to enter the brake line from the connecting parts.

·

Use the formula to calculate special torque values for situations where the union nut wrench is combined with a torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION




c.

Install the rear flexible hose to the flexible hose bracket with the 2 bolts.

Torque:
18.8 N*m (192 kgf*cm, 14 ft.*lbf)


d.

Connect the rear flexible hose to the rear disc brake cylinder assembly with a new union bolt and a new gasket.

Torque:
22 N*m (224 kgf*cm, 16 ft.*lbf)

NOTICE:

Install the rear flexible hose lock securely into the lock hole in the rear disc brake cylinder assembly.



Hide 4.INSTALL REAR WHEEL

Torque:
103 N*m (1050 kgf*cm, 76 ft.*lbf)