Home › Brake › BRAKE (REAR) › REAR BRAKE FLEXIBLE HOSE
RM3160E _54 Brake _019695 BRAKE (REAR) _0109278 REAR BRAKE FLEXIBLE HOSE A

BRAKE (REAR)  REAR BRAKE FLEXIBLE HOSE  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

If the left and right rear flexible hoses are disconnected at the same time, be sure to place an identification mark on each hose to indicate its installation position.


HINT:
·

Use the same procedure for the LH side and RH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 2.DRAIN BRAKE FLUID

NOTICE:

If brake fluid leaks onto any painted surface, immediately wash it off.


Hide 47319F 3.REMOVE REAR FLEXIBLE HOSE

a.
C291571

Remove the union bolt and gasket, and disconnect the rear flexible hose from the rear disc brake cylinder assembly.


b.
C291572

Remove the 2 bolts and separate the rear flexible hose from the flexible hose bracket.


c.
C291573

Using a union nut wrench, disconnect the brake line while holding the rear flexible hose with a wrench.

NOTICE:
·

Do not kink or damage the brake line.

·

Do not allow any foreign matter such as dirt or dust to enter the brake line from the connecting parts.




d.

Remove the clip and rear flexible hose.


Hide 4.REMOVE FLEXIBLE HOSE BRACKET

a.
C291574

Remove the bolt and flexible hose bracket from the rear upper control arm assembly.