Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL MAIN SWITCH › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019684 CRUISE CONTROL _0109281 CRUISE CONTROL MAIN SWITCH G

CRUISE CONTROL  CRUISE CONTROL MAIN SWITCH  INSPECTION  


PROCEDURE

Hide 84632 1.INSPECT CRUISE CONTROL MAIN SWITCH

a.

w/o Radar Cruise Control System:

i.

Measure the resistance according to the value(s) in the table below.

A315699
5.24,1 5.5,0.5 5.5,0.5 5.75,0.5 false 2.833,3.25 2.833,2.75 2.833,2.75 3,2.75 false 2.458,3.25 2.458,3.542 2.458,3.542 2.292,3.542 false 5.813,0.417 6.125,0.573 0.313,0.156 10 false *1 1.948,2.719 2.26,2.875 0.313,0.156 10 false *a 6.208,1.01 6.521,1.167 0.313,0.156 10 false *b 4.781,0.469 5.094,0.625 0.313,0.156 10 false *c 5.01,2.531 5.323,2.688 0.313,0.156 10 false *d 3.604,2.406 3.917,2.563 0.313,0.156 10 false *e 3.042,2.667 3.5,2.865 0.458,0.198 10 false ECC 1.958,3.469 2.417,3.667 0.458,0.198 10 false CCS
*1 Cruise Control Main Switch (ON-OFF button) - -
*a Component without harness connected
(Cruise Control Main Switch)
*b ON-OFF
*c +/RES *d -/SET
*e CANCEL - -


Standard Resistance:
Tester Connection Condition Specified Condition
1 (ECC) - 4 (CCS) Cruise control switch (ON-OFF button) released 1 MΩ or higher
Cruise control switch (ON-OFF button) pushed Below 1.5 Ω
+/RES 235 to 245 Ω
-/SET 617 to 643 Ω
CANCEL 1509 to 1571 Ω


If the result is not as specified, replace the cruise control main switch.


ii.

Apply battery voltage to the cruise control main switch connector and check that the cruise control main switch illuminates.

A315893
2.167,0.792 2.5,0.5 2.5,0.5 2.667,0.5 false 2.771,3.281 2.771,3.531 2.771,3.531 2.938,3.531 false 1.948,2.74 2.26,2.896 0.313,0.156 10 false *a 2.688,0.417 3,0.573 0.313,0.156 10 false *b 2.99,3.458 3.604,3.656 0.615,0.198 10 false IL+2
*a Component without harness connected
(Cruise Control Main Switch)
*b Ground


OK:
Connection Specified Condition
Battery positive (+) → Terminal 2 (IL+2)
Battery negative (-) → Ground
Illuminates


If the result is not as specified, replace the cruise control main switch.



b.

w/ Radar Cruise Control System:

i.

Measure the resistance according to the value(s) in the table below.

A315698
5.323,1.417 5.5,1.833 5.5,1.833 5.75,1.833 false 2.833,3.25 2.833,2.75 2.833,2.75 3,2.75 false 2.604,3.25 2.604,2.75 2.604,2.75 2.438,2.75 false 2.458,3.208 2.458,3.542 2.458,3.542 2.292,3.542 false 5.792,1.75 6.104,1.906 0.313,0.156 10 false *1 1.927,2.708 2.24,2.865 0.313,0.156 10 false *a 6.188,1 6.5,1.156 0.313,0.156 10 false *b 4.542,0.49 4.854,0.646 0.313,0.156 10 false *c 4.781,2.521 5.094,2.677 0.313,0.156 10 false *d 5.677,0.125 5.99,0.281 0.313,0.156 10 false *e 3.927,2.427 4.24,2.583 0.313,0.156 10 false *f 3.042,2.667 3.5,2.865 0.458,0.198 10 false ECC 2.188,2.667 2.646,2.865 0.458,0.198 10 false R/N 1.979,3.469 2.438,3.667 0.458,0.198 10 false CCS
*1 Cruise Control Main Switch (ON-OFF button) - -
*a Component without harness connected
(cruise control main switch)
*b ON-OFF
*c +/RES *d -/SET
*e MODE *f CANCEL


Standard Resistance:
Tester Connection Condition Specified Condition
1 (ECC) - 3 (R/N) Cruise control switch (ON/OFF button) not pressed 1 MΩ or higher
MODE Below 1.5 Ω
1 (ECC) - 4 (CCS) Cruise control switch (ON/OFF button) not pressed 1 MΩ or higher
Cruise control switch (ON/OFF button) pressed Below 1.5 Ω
+/RES 235 to 245 Ω
-/SET 617 to 643 Ω
CANCEL 1509 to 1571 Ω


If the result is not as specified, replace the cruise control main switch.


ii.

Apply battery voltage to the cruise control main switch connector and check that the cruise control main switch illuminates.

A315892
2.156,0.802 2.5,0.5 2.5,0.5 2.667,0.5 false 2.771,3.25 2.771,3.542 2.771,3.542 2.938,3.542 false 1.948,2.708 2.26,2.865 0.313,0.156 10 false *a 2.708,0.417 3.021,0.573 0.313,0.156 10 false *b 2.99,3.458 3.604,3.656 0.615,0.198 10 false IL+2
*a Component without harness connected
(Cruise Control Main Switch)
*b Ground


OK:
Connection Specified Condition
Battery positive (+) → Terminal 2 (IL+2)
Battery negative (-) → Ground
Illuminates


If the result is not as specified, replace the cruise control main switch.