Home › Engine / Hybrid System › CRUISE CONTROL › LANE RECOGNITION CAMERA SENSOR › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019684 CRUISE CONTROL _0109282 LANE RECOGNITION CAMERA SENSOR A

CRUISE CONTROL  LANE RECOGNITION CAMERA SENSOR  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:
·

If the lane departure warning camera bracket is deformed or damaged, replace it together with the windshield glass.

·

When replacing the windshield glass of a vehicle equipped with a lane departure warning camera, make sure to use a Toyota genuine part. The lane departure warning camera may not be able to be installed due to a missing bracket or the lane departure alert system may not operate properly due to a difference in the transmissivity or black ceramic border.

·

If the lane departure warning camera is dropped, replace it with a new one.



PROCEDURE

Hide 86468 1.INSTALL LANE DEPARTURE WARNING CAMERA

a.

When using a new lane departure warning camera:

i.
E287759

Remove the protective film.

NOTICE:

Do not touch the camera lens after removing the protective film.




b.

Slide the lane departure warning camera in the direction indicated by the arrow (1) shown in the illustration to engage the 2 guides.

E287760
4.479,1.458 4.635,1.656 0.156,0.198 10 false 1 3.083,1.813 3.24,2.01 0.156,0.198 10 false 2 0.104,4.021 0.563,4.219 0.458,0.198 10 false 10°

NOTICE:

Do not touch the camera lens.



c.

Slide the lane departure warning camera in the direction indicated by the arrow (2) shown in the illustration to engage the guide.


d.

Connect the connector to install the lane departure warning camera.


Hide 86466 2.INSTALL LANE DEPARTURE WARNING CAMERA COVER

a.

Engage the 4 guides to install the lane departure warning camera cover as shown in the illustration.

E287761


Hide 86466 3.INSPECT LANE DEPARTURE WARNING CAMERA COVER

a.
E287762
1.052,1.906 1.208,2.104 0.156,0.198 10 false A

Check the clearance of area A.

Standard Clearance
Area Measurement
A 0 to 2.0 mm (0 to 0.0787 in.)

HINT:

If the result is not as specified, the guides are not engaged properly. Reinstall the lane departure warning camera cover.



Hide 89943 4.INSTALL RAIN SENSOR COVER

a.
E287756

Engage the 2 guides as shown in the illustration.


b.
E287754

Engage the 2 guides and install the rain sensor cover as shown in the illustration.


Hide 86468 5.ADJUST LANE DEPARTURE WARNING CAMERA