Home › Engine / Hybrid System › CRUISE CONTROL › LANE RECOGNITION CAMERA SENSOR › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019684 CRUISE CONTROL _0109282 LANE RECOGNITION CAMERA SENSOR A

CRUISE CONTROL  LANE RECOGNITION CAMERA SENSOR  REMOVAL  


PROCEDURE

Hide 89943 1.REMOVE RAIN SENSOR COVER

a.
E287753

Disengage the 2 guides as shown in the illustration.


b.
E287755

Disengage the 2 guides and remove the rain sensor cover as shown in the illustration.


Hide 86466 2.REMOVE LANE DEPARTURE WARNING CAMERA COVER

a.
E287757

Disengage the 4 guides and remove the lane departure warning camera cover as shown in the illustration.


Hide 86468 3.REMOVE LANE DEPARTURE WARNING CAMERA

a.
E287758
2.677,3.615 2.833,3.813 0.156,0.198 10 false 1 1.656,3.969 1.813,4.167 0.156,0.198 10 false 2

Disconnect the connector.


b.

Disengage the 3 guides and remove the lane departure warning camera as indicated by the arrows, in the order shown in the illustration.

NOTICE:
·

Do not pull the harness forcibly when disconnecting the connector.

·

If the lane departure warning camera bracket is deformed or damaged, replace it together with the windshield glass.

·

If the lane departure warning camera is dropped, replace it with a new one.