84920
1.INSPECT POWER SEAT SWITCH ASSEMBLY
| *a | ·
Hold Switch (for LHD) ·
Release Switch (for RHD) |
| *b | ·
Release Switch (for LHD) ·
Hold Switch (for RHD) |
| *c | Component without harness connected
(Power Seat Switch Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Hold switch pressed | Below 1 Ω |
| 3 - 5 | ||
| 1 - 2 | Off | |
| 2 - 3 | ||
| 1 - 5 | Release switch pressed | |
| 2 - 3 |
If the result is not as specified, replace the power seat switch assembly.