84928
1.INSPECT SEAT VARIABLE CUSHION SWITCH
| *A | for LHD |
| *B | for RHD |
| *a | Front Switch |
| *b | Rear Switch |
| *c | Component without harness connected
(Seat Variable Cushion Switch) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 2 - 5 | Front switch pressed | Below 1 Ω |
| 3 - 4 | ||
| 1 - 5 | Off | Below 1 Ω |
| 3 - 4 | ||
| 1 - 5 | Rear switch pressed | Below 1 Ω |
| 2 - 3 |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 2 | Front switch pressed | Below 1 Ω |
| 5 - 1 | ||
| 3 - 4 | Off | Below 1 Ω |
| 5 - 1 | ||
| 3 - 4 | Rear switch pressed | Below 1 Ω |
| 5 - 2 |
If the result is not as specified, replace the seat variable cushion switch.