Home › General › SPECIFICATIONS › ALIGNMENT / HANDLING DIAGNOSIS
RM3160E _V1 General _019682 SPECIFICATIONS _0095388 ALIGNMENT / HANDLING DIAGNOSIS F

SPECIFICATIONS  ALIGNMENT / HANDLING DIAGNOSIS  SERVICE DATA  


Vehicle Height (Unloaded Vehicle):
Front A - B Rear C - D
110.8 mm (4.36 in.) 44.0 mm (1.73 in.)


Measurement Points:

A: Ground clearance of front wheel center


B: Ground clearance of front lower suspension arm bushing set bolt center


C: Ground clearance of rear wheel center


D: Ground clearance of rear No. 2 suspension arm set bolt center


Camber (Unloaded Vehicle):
- Camber Inclination Right-left Difference
Front -0.55° +/- 0.75° (-0°33' +/- 0°45') 0.75° (0°45') or less
Rear -0.51° +/- 0.75°(-0°31' +/- 0°45') 0.75°(0°45') or less


Caster (Unloaded Vehicle):
Caster Inclination Right-left Difference
2.66° +/- 0.75° (2°40' +/- 0°45') 0.75° (0°45') or less


Steering Axis Inclination (Unloaded Vehicle):
Steering Axis Inclination Reference
10.83° (10°50')


Toe-in (Unloaded Vehicle):
Specified Condition
Front C + D: 0.08° +/- 0.17° (0°05' +/- 0°10')
B - A: 1.0 +/- 2.0 mm (0.0394 +/- 0.0787 in.)
Rear C + D: -0.08° +/- 0.17° (-0°05' +/- 0°10')
B - A: -1.0 +/- 2.0 mm (-0.0394 +/- 0.0787 in.)


Wheel Turning Angle (Unloaded Vehicle):
Inside Wheel Outside Wheel
35.76° +/- 1.50° (35°46' +/- 1°30' ) 31.24° (31°14')