Home › Suspension › REAR SUSPENSION › REAR UPPER ARM
RM3160E _53 Suspension _019690 REAR SUSPENSION _0109432 REAR UPPER ARM A

REAR SUSPENSION  REAR UPPER ARM  REMOVAL  


PROCEDURE

Hide 51206A 1.REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY

Hide 89516B 2.SEPARATE SKID CONTROL SENSOR WIRE LH (for 2WD)

C202330

a.

Remove the 2 bolts and separate the skid control sensor wire LH from the rear upper control arm assembly LH.


Hide 89546 3.SEPARATE REAR SPEED SENSOR LH (for AWD)

HINT:

Perform the same procedure as for the skid control sensor wire LH.


Hide 89516 4.SEPARATE SKID CONTROL SENSOR WIRE RH (for 2WD)

a.
C202331

Remove the 2 bolts and separate the skid control sensor wire RH from the rear upper control arm assembly RH.


Hide 89545 5.SEPARATE REAR SPEED SENSOR RH (for AWD)

HINT:

Perform the same procedure as for the skid control sensor wire RH.


Hide 48790 6.REMOVE REAR UPPER CONTROL ARM ASSEMBLY LH

a.
C199901

Remove the bolt, nut and rear upper control arm assembly LH from the rear suspension member sub-assembly.

NOTICE:

Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.



Hide 48770A 7.REMOVE REAR UPPER CONTROL ARM ASSEMBLY RH

HINT:

Perform the same procedure as for the LH side.