Home › Suspension › REAR SUSPENSION › REAR LOWER ARM › 2013.12–2015.11
RM3160E _53 Suspension _019690 REAR SUSPENSION _0109433 REAR LOWER ARM A

REAR SUSPENSION  REAR LOWER ARM  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 48738 2.REMOVE REAR SUSPENSION ARM COVER

a.
C293829

Remove the 2 bolts.


b.

Disengage the 2 guides and remove the rear suspension arm cover from the rear No. 2 suspension arm assembly.


Hide 48802 3.REMOVE REAR STABILIZER LINK SUB-ASSEMBLY

Hide 48740F 4.REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY

a.
C293826C03
1.26,1.635 1.688,1.635 true 0.198,1.917 0.344,1.917 true 2.146,0.875 2.146,0.594 2.146,0.594 2.365,0.594 true 2.156,0.635 2.354,0.635 true 2.51,1.635 2.51,1.354 2.51,1.354 2.792,1.354 true 2.521,1.51 2.792,1.51 true 1.708,1.521 1.99,1.719 0.281,0.198 10 true *a 0.031,1.833 0.344,1.99 0.313,0.156 10 false *b 2.073,0.885 2.26,1.073 0.188,0.188 10 true *c 2.438,1.615 2.625,1.802 0.188,0.188 10 true *c 3.042,1.594 3.198,1.792 0.156,0.198 10 true A 0.094,1.458 0.25,1.656 0.156,0.198 10 true B
*a Wooden Block
*b Jack
*c Matchmark


Place matchmarks on the No. 2 adjust cam, toe adjust cam sub-assembly and rear suspension member sub-assembly.


b.

Support the rear No. 2 suspension arm assembly using a jack and wooden block.

CAUTION:

Do not jack up the rear No. 2 suspension arm assembly too high as the vehicle may fall.


NOTICE:

When jacking up the rear No. 2 suspension arm assembly, be sure to jack it up slowly.



c.

Loosen the nut (A).

NOTICE:

Do not remove the nut.



d.

Remove the bolt (B) and nut, and separate the rear No. 2 suspension arm assembly from the rear axle assembly.

NOTICE:

Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.



e.

Slowly lower the rear No. 2 suspension arm assembly, and then remove the rear coil spring.


f.
C293828

Remove the rear lower coil spring insulator from the rear No. 2 suspension arm assembly.


g.
C293830

Remove the nut, No. 2 adjust cam, toe adjust cam sub-assembly and rear No. 2 suspension arm assembly.


Hide 48720A 5.REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY (for 2WD)

a.
C199887C01
1.521,1.479 2.125,1.479 false 1.51,1.875 2.115,1.875 false 2.156,1.396 2.469,1.552 0.313,0.156 10 false *a 2.156,1.771 2.469,1.927 0.313,0.156 10 false *b
*a Attachment
*b Jack


Support the rear suspension member sub-assembly with a jack using an attachment or an equivalent tool as shown in the illustration.

CAUTION:

Do not jack up the rear suspension member sub-assembly too high as the vehicle may fall.


NOTICE:
·

Keep supporting the rear suspension member sub-assembly with a jack until the installation of the rear No. 1 suspension arm assembly has been completed.

·

When jacking up the rear suspension member sub-assembly, be sure to jack it up slowly.




b.
C293831

Remove the bolt, nut and rear lower suspension member stopper.


c.
C199870
2.604,1.604 2.313,1.604 false 1.229,1.948 0.927,1.948 false 0.542,0.188 0.667,0.427 0.125,0.24 10 false B 2.604,1.094 2.781,1.281 0.177,0.188 10 false A 2.646,1.521 2.896,1.74 0.25,0.219 10 false *a 0.75,1.875 1,2.083 0.25,0.208 10 false *b
*a Wooden Block
*b Jack


Support the rear axle assembly with a jack using a wooden block as shown in the illustration.

CAUTION:

Do not jack up the rear axle assembly too high as the vehicle may fall.


NOTICE:
·

Keep supporting the rear axle assembly with a jack until the installation of the rear No. 1 suspension arm assembly has been completed.

·

When jacking up the rear axle assembly, be sure to jack it up slowly.




d.

Remove the nut (A) and spacer.


e.

Remove the bolt (B), nut and rear No. 1 suspension arm assembly.

NOTICE:

Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.



Hide 48720A 6.REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY (for AWD)

a.
C293833C01
1.75,1.604 2.063,1.604 false 1.906,1.781 2.219,1.781 false 2.073,1.521 2.323,1.719 0.25,0.198 10 true *a 2.229,1.698 2.542,1.854 0.313,0.156 10 false *b
*a Wooden Block
*b Jack


Support the rear differential carrier assembly with a jack using a wooden block as shown in the illustration.

CAUTION:

Do not jack up the rear differential carrier assembly too high as the vehicle may fall.


NOTICE:
·

Keep supporting the rear differential carrier assembly with a jack until the installation of the rear No. 1 suspension arm assembly has been completed.

·

When jacking up the rear differential carrier assembly, be sure to jack it up slowly.




b.
C293831

Remove the bolt, nut and rear lower suspension member stopper.


c.
C199870
2.604,1.604 2.313,1.604 false 1.229,1.948 0.927,1.948 false 0.542,0.188 0.667,0.427 0.125,0.24 10 false B 2.604,1.094 2.781,1.281 0.177,0.188 10 false A 2.646,1.521 2.896,1.74 0.25,0.219 10 false *a 0.75,1.875 1,2.083 0.25,0.208 10 false *b
*a Wooden Block
*b Jack


Support the rear axle assembly with a jack using a wooden block as shown in the illustration.

CAUTION:

Do not jack up the rear axle assembly too high as the vehicle may fall.


NOTICE:
·

Keep supporting the rear axle assembly with a jack until the installation of the rear No. 1 suspension arm assembly has been completed.

·

When jacking up the rear axle assembly, be sure to jack it up slowly.




d.

Remove the nut (A) and spacer.


e.

Remove the bolt (B), nut and rear No. 1 suspension arm assembly.

NOTICE:

Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.