1.REMOVE REAR WHEEL
48802
2.REMOVE REAR STABILIZER LINK SUB-ASSEMBLY LH
Remove the 2 nuts (A) and separate the rear stabilizer link sub-assembly LH from the rear No. 2 suspension arm assembly LH.
Remove the nut (B) and the rear stabilizer link sub-assembly LH from the rear stabilizer bar.
If the ball joint turns together with the nut, use a 6 mm hexagon socket wrench to hold the stud bolt.
Secure the rear lower stabilizer bracket LH in a vise using aluminum plates.
Do not overtighten the vise.
Remove the nut and rear stabilizer link sub-assembly LH from the rear lower stabilizer bracket LH.
If the ball joint turns together with the nut, use a 6 mm hexagon socket wrench to hold the stud bolt.
48802
3.REMOVE REAR STABILIZER LINK SUB-ASSEMBLY RH
Perform the same procedure as for the LH side.
48812
4.REMOVE REAR STABILIZER BAR
Remove the 4 nuts, rear stabilizer bar, 2 rear No. 1 stabilizer bar brackets and 2 rear stabilizer bushings from the rear suspension member sub-assembly.
48832A
5.REMOVE REAR NO. 1 STABILIZER BAR BRACKET
Remove the 2 rear No. 1 stabilizer bar brackets from the 2 rear stabilizer bushings.
48818
6.REMOVE REAR STABILIZER BUSHING
Remove the 2 rear stabilizer bushings from the rear stabilizer bar.