Home › Drivetrain › MF1A (TRANSFER / 4WD / AWD) › DYNAMIC TORQUE CONTROL 4WD/AWD SYSTEM
RM3160E _52 Drivetrain _019685 MF1A TRANSFER / 4WD / AWD _0109466 DYNAMIC TORQUE CONTROL 4WD/AWD SYSTEM C

MF1A TRANSFER / 4WD / AWD  DYNAMIC TORQUE CONTROL 4WD/AWD SYSTEM  C1280/82  Engine Circuit Malfunction  


DESCRIPTION

If a malfunction in the ECM circuit occurs, the 4WD ECU assembly will output this DTC.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory
C1280/82 Engine Circuit Malfunction When the following continues for 5 seconds or more:
Communication with engine control ECM is operating normally, but engine control system is malfunctioning.
·

Engine control system

·

4WD ECU assembly


DTC stored

CAUTION / NOTICE / HINT

HINT:

Check the condition of each related circuit connector before troubleshooting.

Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>ELECTRONIC CIRCUIT INSPECTION PROCEDURE


PROCEDURE

1.CHECK FOR DTC (ENGINE CONTROL SYSTEM)
a.

Check if the engine control system DTC is output.

Click hereEngine / Hybrid System>2GR-FE ENGINE CONTROL>SFI SYSTEM>DTC CHECK / CLEAR

Powertrain > Engine > Trouble Codes
50001 61
Result:
Result Proceed to
Engine control system DTCs are not output A
Engine control system DTCs are output B




A

B

GO TO ENGINE CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART)