Home › Engine / Hybrid System › 2GR-FE ENGINE MECHANICAL › DRIVE BELT › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019663 2GR-FE ENGINE MECHANICAL _0109577 DRIVE BELT G

2GR-FE ENGINE MECHANICAL  DRIVE BELT  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 16361A 1.INSPECT V-RIBBED BELT

a.
A058797

Check the V-ribbed belt for wear, cracks or other signs of damage.

If any of the following defects is found, replace the V-ribbed belt.

·

The V-ribbed belt is cracked.

·

The V-ribbed belt is worn out to the extent that the cords are exposed.

·

The V-ribbed belt has chunks missing from the ribs.



b.
A314804C01
0.552,1.167 0.719,1.333 0.167,0.167 10 false *a 2.198,1.167 2.365,1.333 0.167,0.167 10 false *b
*a Correct
*b Incorrect


Check that the V-ribbed belt fits properly in the ribbed grooves.

HINT:

Make sure to check by hand that the V-ribbed belt has not slipped out of the grooves on the bottom of the pulley. If it has slipped out, replace the V-ribbed belt. Install a new V-ribbed belt correctly.