| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Camshaft bearing cap x Camshaft housing sub-assembly LH | 1st | 10 | 102 | 7 | |||
| 2nd | 16 | 163 | 12 | ||||
| Camshaft bearing cap x Camshaft housing sub-assembly RH | 1st | 10 | 102 | 7 | |||
| 2nd | 16 | 163 | 12 | ||||
| Camshaft bearing cap x Camshaft housing sub-assembly LH and Cylinder head sub-assembly LH | 28 | 286 | 21 | ||||
| Camshaft bearing cap x Camshaft housing sub-assembly RH and Cylinder head sub-assembly RH | 28 | 286 | 21 | ||||
| No. 3 chain tensioner assembly x Camshaft housing sub-assembly LH | 21 | 214 | 15 | ||||
| No. 2 chain tensioner assembly x Camshaft housing sub-assembly RH | 21 | 214 | 15 | ||||
| Camshaft timing gear assembly x Camshaft | 100 | 1020 | 74 | ||||
| Camshaft timing exhaust gear assembly x Camshaft | 100 | 1020 | 74 | ||||
| Stud bolt x Timing chain cover sub-assembly | 10 | 102 | 7 | ||||
| Stud bolt x Cylinder block sub-assembly | 10 | 102 | 7 | ||||
| Stud bolt x Oil pan sub-assembly (w/ Oil Cooler) | 9.0 | 92 | 80 | ||||
| Oil pan sub-assembly x Cylinder block sub-assembly | Bolt (A) | 10 | 102 | 7 | |||
| Except Bolt (A) | 21 | 214 | 15 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Cylinder head sub-assembly RH x Cylinder block sub-assembly | 1st | 36 | 367 | 27 | ||
| 2nd | Turn 90° | |||||
| 3rd | Turn 90° | |||||
| Cylinder head sub-assembly LH x Cylinder block sub-assembly | 1st | 36 | 367 | 27 | ||
| 2nd | Turn 90° | |||||
| 3rd | Turn 90° | |||||
| Cylinder head sub-assembly LH x Cylinder block sub-assembly | 30 | 306 | 22 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Crankshaft pulley x Crankshaft | 250 | 2549 | 184 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | |||
|---|---|---|---|---|---|---|
| Drive plate and ring gear sub-assembly x Crankshaft | 83 | 846 | 61 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| No. 1 Engine hanger and No. 2 Engine hanger x Cylinder head sub-assembly | 33 | 337 | 24 | ||||
| Engine mounting insulator RH x Engine assembly with transaxle | 95 | 969 | 70 | ||||
| Engine mounting insulator LH x Engine assembly with transaxle | 95 | 969 | 70 | ||||
| Front engine mounting insulator assembly x Engine assembly with transaxle | 87 | 887 | 64 | ||||
| Rear engine mounting insulator assembly x Engine assembly with transaxle | 75 | 765 | 55 | ||||
| Front engine mounting insulator assembly x Front frame assembly | 52 | 530 | 38 | ||||
| Rear engine mounting insulator assembly x Front frame assembly | 52 | 530 | 38 | ||||
| Engine mounting insulator RH x Front frame assembly | 87 | 887 | 64 | ||||
| Engine mounting insulator LH x Front frame assembly | 87 | 887 | 64 | ||||
| Engine assembly with transaxle x Vehicle body | Bolt (A) | 85 | 867 | 63 | |||
| Bolt (B) and Nut (B) | 32 | 326 | 24 | ||||
| Bolt (C) | 85 | 867 | 63 | ||||
| Bolt (D) and Nut (D) | 32 | 326 | 24 | ||||
| Flywheel housing under cover x Oil pan sub-assembly | 10 | 102 | 7 | ||||
| No. 1 exhaust pipe support bracket x Oil pan sub-assembly | 21 | 214 | 15 | ||||
| Transmission control cable assembly x Transmission control shaft lever | 12 | 122 | 9 | ||||
| Engine wire x Engine room relay block assembly | 8.0 | 82 | 71 | ||||
| Earth wire x Vehicle body | 8.4 | 86 | 74 | ||||
| No. 3 engine mounting stay x Engine moving control rod bracket | 78 | 795 | 58 | ||||
| Engine moving control rod x Vehicle body | 38 | 387 | 28 | ||||
| Engine moving control rod bracket x No. 1 front engine mounting bracket LH | 38 | 387 | 28 | ||||
| Engine moving control rod x Engine moving control rod bracket | 52 | 530 | 38 | ||||
| No. 2 engine mounting stay RH x Engine moving control rod bracket | 38 | 387 | 28 | ||||
| No. 2 engine mounting stay RH x No. 1 front engine mounting bracket LH | 23 | 235 | 17 | ||||
| Battery clamp x Bolt and Nut | 5.4 | 55 | 48 | ||||
| Cable x Positive (+) battery terminal | 6.5 | 66 | 58 | ||||
| Air cleaner case sub-assembly x Vehicle body | 5.0 | 51 | 44 | ||||
| Inlet air cleaner assembly x Vehicle body | 7.0 | 71 | 62 | ||||
| Cable x Negative (-) battery terminal | 6.5 | 66 | 58 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Rear engine oil seal retainer x Cylinder block sub-assembly | 10 | 102 | 7 | ||||
| Water inlet pipe x Cylinder block sub-assembly | 10 | 102 | 7 | ||||
| No. 1 chain vibration damper x Cylinder head sub-assembly LH and cylinder block sub-assembly | 23 | 235 | 17 | ||||
| Idle sprocket assembly x Cylinder block sub-assembly | 60 | 612 | 44 | ||||
| No. 1 chain tensioner assembly x Cylinder head sub-assembly | 10 | 102 | 7 | ||||
| Engine water pump assembly x Timing chain cover sub-assembly | 11 | 112 | 8 | ||||
| Timing chain cover sub-assembly x Engine assembly | Area 1 and Area 2 | 21 | 214 | 15 | |||
| Area 3 | 21 | 214 | 15 | ||||
| Area 4 (Bolt (A)) | 43 | 438 | 32 | ||||
| Area 4 (except Bolt (A)) | 21 | 214 | 15 | ||||
| Timing chain cover plate x Timing chain cover sub-assembly | 9.1 | 93 | 81 | ||||
| Stud bolt x Water inlet housing | 4.0 | 41 | 35 | ||||
| Water inlet housing x Timing chain cover sub-assembly | 10 | 102 | 7 | ||||
| Water inlet housing x Drain cock assembly | 30 | 306 | 22 | ||||
| Drain cock plug x Drain cock assembly | 13 | 133 | 10 | ||||
| Water inlet housing x Water inlet | 10 | 102 | 7 | ||||
| Stud bolt x No. 1 front engine mounting bracket LH | 10 | 102 | 7 | ||||
| No. 1 oil pan baffle plate x Cylinder block sub-assembly | 10 | 102 | 7 | ||||
| Stud bolt x Timing chain cover sub-assembly | 4.0 | 41 | 35 | ||||
| Oil strainer sub-assembly x Cylinder block sub-assembly and Timing chain cover sub-assembly | 10 | 102 | 7 | ||||
| Stud bolt x Oil pan sub-assembly | 4.0 | 41 | 35 | ||||
| Oil pan sub-assembly x No. 2 oil pan sub-assembly | 10 | 102 | 7 | ||||
| Oil pan drain plug x No. 2 oil pan sub-assembly | 40 | 408 | 30 | ||||
| Cylinder head cover sub-assembly x Camshaft housing sub-assembly RH | Bolt (A) | 21 | 214 | 15 | |||
| except Bolt (A) | 10 | 102 | 7 | ||||
| Cylinder head cover sub-assembly LH x Camshaft housing sub-assembly LH | Bolt (A) | 21 | 214 | 15 | |||
| except Bolt (A) | 10 | 102 | 7 | ||||
| Water outlet x Cylinder head sub-assembly | 10 | 102 | 7 | ||||
| Engine oil level dipstick guide x Cylinder block sub-assembly (w/o Oil Cooler) | 21 | 214 | 15 | ||||
| Stud bolt x No. 1 oil cooler bracket | 10 | 102 | 7 | ||||
| No. 1 oil cooler bracket x Oil cooler pipe | 21 | 214 | 15 | ||||
| No. 1 oil cooler bracket with oil cooler pipe x Engine assembly | 21 | 214 | 15 | ||||
| Cylinder block water drain cock sub-assembly x Cylinder block sub-assembly | 25 | 255 | 18 | ||||
| Water drain cock plug x Cylinder block water drain cock sub-assembly | 13 | 133 | 10 | ||||
| Taper screw plug x Cylinder block sub-assembly | 13 | 133 | 10 | ||||
| No. 1 oil pipe x Cylinder head cover sub-assembly | 65 | 663 | 48 | ||||
| No. 1 oil pipe x Cylinder head sub-assembly | 65 | 663 | 48 | ||||
| Oil pipe x Cylinder head sub-assembly | Bolt (A) | 10 | 102 | 7 | |||
| Oil pipe x Cylinder head cover sub-assembly | 65 | 663 | 48 | ||||
| Oil pipe x Cylinder head sub-assembly | 65 | 663 | 48 | ||||
| Ventilation valve sub-assembly x Cylinder head cover sub-assembly LH | 27 | 275 | 20 | ||||
| Engine oil pressure switch assembly x Oil pan sub-assembly | 15 | 153 | 11 | ||||
| No. 1 vacuum switching valve x Cylinder head cover sub-assembly | 10 | 102 | 7 | ||||
| No. 2 idler pulley sub-assembly and No. 2 idler pulley cover plate x Timing chain cover sub-assembly | 54 | 551 | 40 | ||||
| Water pump pulley x Engine water pump assembly | 21 | 214 | 15 | ||||
| No. 2 timing gear cover x Cylinder head sub-assembly RH | 6.0 | 61 | 53 | ||||
| V-ribbed belt tensioner assembly x Engine assembly | 43 | 438 | 32 | ||||
| Rear engine mounting bracket x Engine assembly | 64 | 653 | 47 | ||||
| Engine mounting bracket RH x Engine assembly | 54 | 551 | 40 | ||||
| Exhaust manifold sub-assembly LH x Cylinder head sub-assembly | 21 | 214 | 15 | ||||
| Exhaust manifold sub-assembly RH x Cylinder head sub-assembly | 21 | 214 | 15 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Stud bolt x Cylinder head sub-assembly | Bolt (A) and (B) | 10 | 102 | 7 | |||
| Bolt (C) | 4.0 | 41 | 35 | ||||
| No. 1 straight screw plug x Cylinder head sub-assembly | 44 | 449 | 32 | ||||
| No. 2 straight screw plug x Cylinder head sub-assembly | 80 | 816 | 59 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Stud bolt x Cylinder block sub-assembly | Bolt (A) | 10 | 102 | 7 | |||
| Bolt (B) | 17 | 173 | 13 | ||||
| No. 1 oil nozzle sub-assembly x Cylinder block sub-assembly | 9.0 | 92 | 80 | ||||
| Crankshaft bearing cap x Cylinder block sub-assembly | 1st | 61 | 622 | 45 | |||
| 2nd | Turn 90° | ||||||
| Cylinder block sub-assembly x Crankshaft bearing cap | 52 | 530 | 38 | ||||
| Connecting rod cap x Connecting rod | 1st | 25 | 255 | 18 | |||
| 2nd | Turn 90° | ||||||