52142C
1.INSTALL FRONT BUMPER STAY LH
Engage the claw.
Engage the clip as shown in the illustration.
Install the front bumper stay LH with the bolt.
52141D
2.INSTALL FRONT BUMPER STAY RH
Use the same procedure as for the LH side.
52131A
3.INSTALL FRONT BUMPER REINFORCEMENT
Install the front bumper reinforcement with the 6 bolts.
Engage the 2 clamps.
52611
4.INSTALL FRONT BUMPER ENERGY ABSORBER
Engage the 2 guides to install the front bumper energy absorber.
75895K
5.INSTALL NO. 1 MOULDING TAPE
Clean off any tape adhesive residue with cleaner.
Using a brush or sponge, coat the application area of No. 1 moulding tape with primer.
Do not apply too much primer.
Allow the primer to dry for 3 minutes or more.
Throw away any leftover primer.
If an area other than specified is coated by accident, wipe off the primer with a clean piece of cloth before it dries.
Remove the release paper from a new No. 1 moulding tape.
After removing the release paper, keep the exposed adhesive free from foreign matter.
| *a | Line |
Install the No. 1 moulding tape as shown in the illustration.
Apply the No. 1 moulding tape along the line marked on the front bumper cover.
Use the same procedure for the RH side and LH side.
52129B
6.INSTALL LOWER FRONT BUMPER COVER
Engage the 18 claws.
Install the lower front bumper cover with the 6 clips.
52114A
7.INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET
Engage the 2 claws.
Install the front bumper extension mounting bracket with the 2 screws.
53102A
8.INSTALL LOWER RADIATOR GRILLE SUB-ASSEMBLY
Engage the 2 guides and 10 claws.
Install the lower radiator grille sub-assembly with the 2 clips.
52128B
9.INSTALL FRONT BUMPER HOLE COVER LH
| *a | Hook |
Engage the hook.
Engage the 2 claws to install the front bumper hole cover LH.
52127D
10.INSTALL FRONT BUMPER HOLE COVER RH
Use the same procedure as for the LH side.
52536
11.INSTALL FRONT BUMPER SIDE RETAINER LH
Engage the 3 claws.
Install the clip.
Install the front bumper side retainer LH with the screw.
52535
12.INSTALL FRONT BUMPER SIDE RETAINER RH
Use the same procedure as for the LH side.
53879H
13.INSTALL FRONT FENDER LINER RETAINER
Engage the claw to install the front fender liner retainer.
Use the same procedure for the RH side and LH side.
81482C
14.INSTALL FOG LIGHT COVER LH
Engage the guide and 2 claws.
Install the fog light cover LH with the clip.
81481E
15.INSTALL FOG LIGHT COVER RH
Use the same procedure as for the LH side.
81440B
16.INSTALL DAYTIME RUNNING LIGHT ASSEMBLY LH
81430C
17.INSTALL DAYTIME RUNNING LIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
81220
18.INSTALL FOG LIGHT ASSEMBLY LH
81210A
19.INSTALL FOG LIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
85271
20.INSTALL NO. 1 HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)
Engage the 8 clamps to install the headlight cleaner hose.
85208A
21.INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)
85207A
22.INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)
Use the same procedure for the LH side.
85341A
23.INSTALL HEADLIGHT CLEANER WASHER NOZZLE COVER LH (w/ Headlight Cleaner System)
85341A
24.INSTALL HEADLIGHT CLEANER WASHER NOZZLE COVER RH (w/ Headlight Cleaner System)
Use the same procedure for the LH side.