Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER › 2013.12–2016.11
RM3160E _59 Vehicle Exterior _019724 EXTERIOR PANELS / TRIM _0109634 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR BUMPER ASSEMBLY

a.

w/ TOYOTA Parking Assist-sensor System:

i.

Connect the connector.



b.

w/ Rear Fog Light:

i.

Connect the connector.



c.
B408127

Move the rear bumper assembly into position.


d.
B408128

Engage the 7 claws as shown in the illustration.

HINT:

Use the same procedure for the RH side and LH side.



e.

Install the 6 clips.


f.

Install the rear bumper assembly with the 4 screws.


Hide 75874 2.CONNECT QUARTER PANEL WHEEL OPENING MOULDING LH

a.
B408129

Engage the 2 clips.


b.

Engage the 4 claws.


c.

Install the 2 clips.


d.

w/o Mudguard:

i.

Connect the quarter panel wheel opening moulding LH with the 3 screws.



e.

w/ Mudguard:

i.

Connect the quarter panel wheel opening moulding LH with the 2 screws.



Hide 75873 3.CONNECT QUARTER PANEL WHEEL OPENING MOULDING RH

HINT:

Use the same procedure as for the LH side.


Hide 76626D 4.INSTALL REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)

Hide 76625D 5.INSTALL REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)

HINT:

Use the same procedure as for the LH side.