Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
75631K
1.REMOVE NO. 1 ROOF SIDE GARNISH LID
Use the same procedure for all the No. 1 roof side garnish lids.
| *a | Protective Tape |
|
Protective Tape |
Apply protective tape around the No. 1 roof side garnish lid.
Using a screwdriver with its tip wrapped with protective tape, disengage the claw as shown in the illustration.
Disengage the guide to remove the No. 1 roof side garnish lid.
75633F
2.REMOVE NO. 2 ROOF SIDE GARNISH LID
Use the same procedure for all the No. 2 roof side garnish lids.
| *a | Protective Tape |
|
Protective Tape |
Apply protective tape around the No. 2 roof side garnish lid.
Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws as shown in the illustration.
Disengage the 2 guides to remove the No. 2 roof side garnish lid.
63470B
3.REMOVE ROOF RACK ASSEMBLY
Apply protective tape around the roof rack assembly.
|
Protective Tape | - | - |
Remove the 6 bolts and roof rack assembly.
Remove the 6 No. 2 roof carrier seals.
4.REMOVE NO. 1 ROOF CARRIER PROTECTOR
Remove the No. 1 roof carrier protector.
5.REMOVE NO. 3 ROOF CARRIER PROTECTOR
Remove the No. 3 roof carrier protector.
63487A
6.REMOVE FRONT ROOF RACK LEG CUSHION
|
Double-sided Tape |
Separate the double-sided tape and disengage the 2 guides to remove the front roof rack leg cushion.
63489
7.REMOVE REAR ROOF RACK LEG CUSHION
|
Double-sided Tape |
Separate the double-sided tape and disengage the 2 guides to remove the rear roof rack leg cushion.