Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR DOOR WINDOW FRAME MOULDING
RM3160E _59 Vehicle Exterior _019724 EXTERIOR PANELS / TRIM _0109643 REAR DOOR WINDOW FRAME MOULDING A

EXTERIOR PANELS / TRIM  REAR DOOR WINDOW FRAME MOULDING  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.


·

The following procedure is for the LH side.



PROCEDURE

Hide 75744 1.INSTALL REAR DOOR REAR UPPER OUTSIDE MOULDING

a.

Using an air riveter or hand riveter with a nose piece, install the rear door rear upper outside moulding with 3 new rivets.

B363135

HINT:

If the mandrel of the rivet does not come off on the first operation of the rivet gun, slide the rivet gun forward on the mandrel and operate it again.


NOTICE:
·
B125583
1.292,0.281 1.438,0.281 1.438,0.281 1.781,0.74 false 1.875,1.271 1.875,1.823 false 1.125,0.208 1.438,0.365 0.313,0.156 10 false *a 1.823,1.875 2.135,2.094 0.313,0.219 10 false *b 2.063,0.063 2.385,0.302 0.323,0.24 10 false *c
*a Riveter
*b Mandrel
*c Incorrect


Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.

·
B125584
1.438,0.448 1.156,0.448 false 1.458,1.417 1.219,1.417 false 1.479,0.365 1.802,0.604 0.323,0.24 10 false *a 2.198,0.125 2.51,0.365 0.313,0.24 10 false *b 2.052,1.146 2.365,1.385 0.313,0.24 10 false *b 1.531,1.313 1.854,1.552 0.323,0.24 10 false *a
*a Riveter
*b Incorrect


Confirm that the rivets are seated properly against the moulding.

·

Do not tilt the riveter when installing the rivet to the moulding.

·

Do not leave any space between the rivet head and moulding.

·
B125585
1.135,0.771 1.396,0.771 false 1.438,0.667 1.75,0.938 0.313,0.271 10 false *a 2.01,0.188 2.344,0.469 0.333,0.281 10 false *b
*a Riveter
*b Incorrect


Do not leave any space between the moulding and door frame. Firmly hold the 2 items together while installing the rivet.




Hide 75764A 2.INSTALL REAR DOOR UPPER WINDOW FRAME MOULDING

a.

Engage the guide of the rear door upper window frame moulding to the door frame.

B363133


b.

Using an air riveter or hand riveter with a nose piece, install the rear door upper window frame moulding with 5 new rivets.

HINT:

If the mandrel of the rivet does not come off on the first operation of the rivet gun, slide the rivet gun forward on the mandrel and operate it again.


NOTICE:
·
B125583
1.292,0.281 1.438,0.281 1.438,0.281 1.781,0.74 false 1.875,1.271 1.875,1.823 false 1.125,0.208 1.438,0.365 0.313,0.156 10 false *a 1.823,1.875 2.135,2.094 0.313,0.219 10 false *b 2.063,0.063 2.385,0.302 0.323,0.24 10 false *c
*a Riveter
*b Mandrel
*c Incorrect


Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.

·
B125584
1.438,0.448 1.156,0.448 false 1.458,1.417 1.219,1.417 false 1.479,0.365 1.802,0.604 0.323,0.24 10 false *a 2.198,0.125 2.51,0.365 0.313,0.24 10 false *b 2.052,1.146 2.365,1.385 0.313,0.24 10 false *b 1.531,1.313 1.854,1.552 0.323,0.24 10 false *a
*a Riveter
*b Incorrect


Confirm that the rivets are seated properly against the moulding.

·

Do not tilt the riveter when installing the rivet to the moulding.

·

Do not leave any space between the rivet head and moulding.

·
B125585
1.135,0.771 1.396,0.771 false 1.438,0.667 1.75,0.938 0.313,0.271 10 false *a 2.01,0.188 2.344,0.469 0.333,0.281 10 false *b
*a Riveter
*b Incorrect


Do not leave any space between the moulding and door frame. Firmly hold the 2 items together while installing the rivet.




Hide 75766A 3.INSTALL REAR DOOR REAR WINDOW FRAME MOULDING

HINT:

When installing a new rear door rear window frame moulding, heat the vehicle body and rear door rear window frame moulding using a heat light.


Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Rear Door Rear Window Frame Moulding 20 to 30°C (68 to 86°F)

NOTICE:

Do not heat the vehicle body or rear door rear window frame moulding excessively.


a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove any double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new rear door rear window frame moulding.

i.

Using a heat light, heat the vehicle body and rear door rear window frame moulding.


ii.

Remove the release paper from the new rear door rear window frame moulding.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



iii.
B363131
1.01,0.896 1.49,1.052 true 1.76,0.354 2.219,0.156 true 1.844,1.24 2.302,1.042 true 0.844,0.792 1.156,0.948 0.313,0.156 10 false *a 2.229,0.063 2.542,0.219 0.313,0.156 10 false *a 2.333,0.958 2.646,1.115 0.313,0.156 10 false *a
*a Double-sided Tape


Engage the 3 clips and attach the double-sided tape to install the rear door rear window frame moulding.

HINT:

Press the rear door rear window frame moulding firmly to install it.




Hide 75762A 4.INSTALL REAR DOOR FRONT WINDOW FRAME MOULDING

HINT:

When installing a new rear door front window frame moulding, heat the vehicle body and rear door front window frame moulding using a heat light.


Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Rear Door Front Window Frame Moulding 20 to 30°C (68 to 86°F)

NOTICE:

Do not heat the vehicle body or rear door front window frame moulding excessively.


a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove any double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new rear door front window frame moulding.

i.

Using a heat light, heat the vehicle body and rear door front window frame moulding.


ii.

Remove the release paper from the new rear door front window frame moulding.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



iii.
B363129
1.479,1.115 0.969,0.708 true 2.292,1.833 1.781,1.427 true 2.167,2.469 1.656,2.063 true 0.792,0.646 1.104,0.802 0.313,0.156 10 false *a 2.208,2.427 2.521,2.583 0.313,0.156 10 false *b 2.323,1.781 2.635,1.938 0.313,0.156 10 false *a
*a Double-sided Tape
*b Caulking Sponge


Engage the clip and guide and attach the double-sided tape and caulking sponge to install the rear door front window frame moulding.

HINT:

Press the rear door front window frame moulding firmly to install it.




Hide 67872 5.CONNECT REAR DOOR WEATHERSTRIP

a.

Engage the 2 clips and connect the rear door weatherstrip.


Hide 75740 6.INSTALL REAR DOOR BELT MOULDING ASSEMBLY